Photobucket
Photobucket
Members Login
Post Info TOPIC: Wiring Harness for 67 Beaumont


Addicted!

Status: Offline
Posts: 143
Date:
Wiring Harness for 67 Beaumont


Ok the 67 Beaumont 300 sedan V8 that I just bought might need a new wiring harness so what do I do? Can I use a 67 Chevelle or a 67 Pontiac or do I need a 67 Beaumont only? And where can I purchess a harness for this car? Thanks BOSSY.

__________________
Ron Bedard


Canadian Poncho Superstar!

Status: Offline
Posts: 5034
Date:

If you don't want a GM used harness, I just got a EZ wire harness for my 52. less expensive than Painless & Ron frances[ paid $185 US] all wires are labeled & GM style fuse box but doesn't have the big plug on back of box [they may have that style as well??] so I can mount the box antwhere!!!  Something to look into  Google EZ wiring for site

__________________

I joined the PROCRASTINATOR club last year,we still haven't had a meeting yet.    !!!!!!!! BLACKSTOCK Ont.



Guru

Status: Offline
Posts: 518
Date:

The dash harness will not be "exactly" correct from a Chevelle due to the different clusters. Depending on your skill level and appetite you could probably make one work by swapping some connectors.
Gary

__________________

72 Nova SS - Minitubbed
70 Nova SS - #'s L-78 Bench Stick
68 Acadian SS clone - factory air
67 Chevelle rag - SS 427 clone



A Poncho Legend!

Status: Offline
Posts: 35741
Date:

Send these guys your old harness, or photographs of the changes, and they will make it...



http://www.americanautowire.com/factoryfit.html

__________________

 



Poncho Master!

Status: Offline
Posts: 1509
Date:

427carl wrote:

Send these guys your old harness, or photographs of the changes, and they will make it...



http://www.americanautowire.com/factoryfit.html


 Called them today and apparently they will not create a harness but may do a modified one.

I'm looking to replace the engine and front harnesses in our 67 Beaumont. I understand the under dash

will be quite different but hard to follow how the under hood (headlight and engine harnesses) would be different.

Has anybody come up with a solution yet??



__________________

......big block, 4 speed, bench seat, it doesn't get much better

 happy motoring :burnout



Poncho Master!

Status: Offline
Posts: 1509
Date:

Received the engine harness from American Autowire. It appears to be identical to the original

harness in our 67 Beaumont 396. I am converting to HEI and this particular harness has been modified

to accommodate the HEI. I have not ordered the headlight harness yet but will soon, can't imagine that

being different from a Chevelle.......we'll see.

AA said they do not support Beaumont wiring, but I suspect that would be the under dash harness.

 



__________________

......big block, 4 speed, bench seat, it doesn't get much better

 happy motoring :burnout



Addicted!

Status: Offline
Posts: 222
Date:

I always assumed the Beaumont harness was the same as the GTO because of the similar dash?..

__________________


Poncho Master!

Status: Offline
Posts: 1509
Date:

66 327 sd wrote:

I always assumed the Beaumont harness was the same as the GTO because of the similar dash?..


I asked AA about that and they said the two are different.

Of course they said that about the engine harness too and that turned out to be wrong.

I fully suspect the headlight harness will be the same for a 67 Chevelle and a 67 Beaumont.

Hope to order one sometime in the fall.

 



-- Edited by bjburnout on Sunday 26th of August 2018 11:57:23 AM

__________________

......big block, 4 speed, bench seat, it doesn't get much better

 happy motoring :burnout

Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.

Tweet this page Post to Digg Post to Del.icio.us
.
Support Canadian Poncho!
Select Amount:
.
.
.