I found a couple photos, but still not 100% clear on this.

I think this picture will show how i think it should be:

Blue is a separate small "hook" bracket that bolts on with the coil bracket
Yellow is the throttle return spring
Red is the kickdown link
Green is the kickdown retun spring that attaches to the rear wire loom

Is this look right to the rest of you?

That is based loosly on what can be seen it this photo


The 2nd and third show the coil clip

If you look at the kickdown, there is a small hole to accept a retun spring(its missing, because the wireloom is also gone.)

-- Edited by beaumontguru at 22:45, 2009-02-14