Does anyone know where I can get new control arms for my car? I also looking for inner front fenders, would 67 chevrolet impala fit? Where could I get those too?
ecklers late great chevy has alot of stuff. Nice ride! Welcome aboard, im sure you will get more awnsers soon, these guys on here know everything, i mean everything!!LOL
rebelrouser said
Dec 5, 2009
Try Hotchkis-I've got the complete system on my 'Chief and it's real easy to put in.
-- Edited by rebelrouser on Saturday 5th of December 2009 09:06:14 PM
I think you'll find the inner fenders are different. Of the Pontiacs I have the inner fenders are different from the comparable year Chevys - e.g. my 63 & 68 Pontiacs have different inners than my 63 & 68 Chevs. But i don't have any 67s to compare.
nope thats my neighbor! He "hangs out" over here sometimes...
80GPLJ said
Dec 6, 2009
Nice 2+2 by the way
67 2+2 Ragtop said
Dec 6, 2009
Good point, I will check them out again. They look quite rusted! thx
1965CS said
Dec 7, 2009
rebelrouser wrote:
Try Hotchkis-I've got the complete system on my 'Chief and it's real easy to put in.
-- Edited by rebelrouser on Saturday 5th of December 2009 09:06:14 PM
I heard they are great kits. What is the complete kit worth?
427carl said
Dec 7, 2009
1965CS wrote:
rebelrouser wrote:
Try Hotchkis-I've got the complete system on my 'Chief and it's real easy to put in.
I heard they are great kits. What is the complete kit worth?
1803 - Hotchkis Performance Rear Trailing Arms
Upgrade your stock GM rear suspension.
With Hotchkis Trailing Arms and Trailing Arm Mount Braces launches are quicker, smoother and more consistent. Cornering and overall stability are dramatically improved. The Trailing Arms are constructed from .120'' wall steel tubing and are fitted with greasable polyurethane/graphite bushings. The Trailing Arm Mount Braces strengthen the trailing arm mounting points on the chassis. And for the serious enthusiast, Hotchkis Adjustable Upper Trailing Arms allow pinion angle adjustment for superior traction and proper U-joint angle at varying ride heights. Fabricated from high quality TIG welded steel and finished in black powdercoat. Easy to install and come complete with hardware.
That Hotchkis setup is sweet, but I have to mention that GlobalWest arms have a spherical bearing at one end and poly on the other. No binding and far better suspension compliance is the result. Just Poly on all 4 rear arms will restrict the suspensions motion somewhat. You'll just end up with stiffness, which will feel like a big improvement over rubber yes, but the suspension will actually be binding as one end of the axle attempts to move up or down when that wheel encounters a bump or dip. The car body will just be following all road contours. You want as much compliance as possible. The car will handle and ride so much better. GlobalWest front arms use the very best Del-A-Lum bushings. They use them anywhere a twisting motion is not seen. Hotchkis uses inferior poly only on everything.
If I had $1000+ to spend, I'd go with the GlobalWest all around. Their rear system is comparable in price to the Hotchkis, but they don't yet have a rear stabilizer bar for the 65-70 B. You could just use the Hotchkis bar. Neither companies rear arm sets have a provision to use a factory bar.
When I built up my frame for the 69', I've just used Energy Suspension poly everywhere. And I realize now it'll be far from ideal. When the time comes to mate the body to the chassis, I might just change everything.
If you're going to the trouble to replace everything. Why not go with the best if it's the same price.
Not meaning to step on any toes here, just my two cents.
Cheers, Mark
rebelrouser said
Dec 7, 2009
Well I just priced out the Global stuff and for the 4 rear control arms it's going to run about close to a "G" note.I've got I think just over that for my Hotchkis stuff-front and rear sway bars,upper and lower rear control arms,panhard bar and hardware.
-- Edited by rebelrouser on Monday 7th of December 2009 09:48:03 PM
You could do the budget thing and box in your control arms and put new polyurethane bushings for your control arms from Energy suspension. Thats what I did on my Beaumont.
cdnpont said
Dec 7, 2009
rebelrouser wrote:
Well I just priced out the Global stuff and for the 4 rear control arms it's going to run about close to a "G" note.I've got I think just over that for my Hotchkis stuff-front and rear sway bars,upper and lower rear control arms,panhard bar and hardware.
-- Edited by rebelrouser on Monday 7th of December 2009 09:48:03 PM
From what I see Darren, 4 arms and a panhard rod from Global is about $885 USD no hardware. The Hotchkis price for the same thing is $1025 USD hardware included. Were you able to get it on sale? I think to do the entire car would be about $2500 either company. Regardless, it would be a dream to do it using either.
-- Edited by rebelrouser on Saturday 5th of December 2009 09:06:14 PM
Welcome to the site Joe!
Sweet 67!
GlobalWest
Tell us more about the car in a separate post.
Mark.
1803 - Hotchkis Performance Rear Trailing Arms
Upgrade your stock GM rear suspension.
With Hotchkis Trailing Arms and Trailing Arm Mount Braces launches are quicker, smoother and more consistent. Cornering and overall stability are dramatically improved. The Trailing Arms are constructed from .120'' wall steel tubing and are fitted with greasable polyurethane/graphite bushings. The Trailing Arm Mount Braces strengthen the trailing arm mounting points on the chassis. And for the serious enthusiast, Hotchkis Adjustable Upper Trailing Arms allow pinion angle adjustment for superior traction and proper U-joint angle at varying ride heights. Fabricated from high quality TIG welded steel and finished in black powdercoat. Easy to install and come complete with hardware.
View in Current Catalog
Complete list of Hotchkis Performance Rear Trailing Arms
Hotchkis #515-1803
1968-72 Complete Trailing Arm Kit
More Details
Ships
Today
1803 - Hotchkis Performance Rear Trailing Arms Details
1964-72 GM A&G-Bodies
Includes:
515-1202 - Upper Trailing Arms
515-1302 - Lower Trailing Arms
515-1402 - Trailing Arm Brace Kit
515-1702 - Trailing Arm Hardware
That Hotchkis setup is sweet, but I have to mention that GlobalWest arms have a spherical bearing at one end and poly on the other. No binding and far better suspension compliance is the result. Just Poly on all 4 rear arms will restrict the suspensions motion somewhat. You'll just end up with stiffness, which will feel like a big improvement over rubber yes, but the suspension will actually be binding as one end of the axle attempts to move up or down when that wheel encounters a bump or dip. The car body will just be following all road contours. You want as much compliance as possible. The car will handle and ride so much better. GlobalWest front arms use the very best Del-A-Lum bushings. They use them anywhere a twisting motion is not seen. Hotchkis uses inferior poly only on everything.
If I had $1000+ to spend, I'd go with the GlobalWest all around. Their rear system is comparable in price to the Hotchkis, but they don't yet have a rear stabilizer bar for the 65-70 B. You could just use the Hotchkis bar. Neither companies rear arm sets have a provision to use a factory bar.
When I built up my frame for the 69', I've just used Energy Suspension poly everywhere. And I realize now it'll be far from ideal. When the time comes to mate the body to the chassis, I might just change everything.
If you're going to the trouble to replace everything. Why not go with the best if it's the same price.
Not meaning to step on any toes here, just my two cents.
Cheers, Mark
-- Edited by rebelrouser on Monday 7th of December 2009 09:48:03 PM