Bumpstops on front of 70 (Height measurements requested)
Stephenzone said
Feb 1, 2010
Here we go again, on the front now. I need the heights of the front bumpstops for my 70 2+2. Again GM has nothing on the books. Napa will get me a generic one from suspension energy. Just need to know the heights. All i have left is the metal that held the rubber. Its on the underside of the frame inboard from the hub.
cdnpont said
Feb 1, 2010
I think I remember them being about 2 inches tall Stephen, I'll go out and check...
cdnpont said
Feb 1, 2010
From the mounting face of the metal base, 1 7/8". Or 1 3/4" of rubber.
Stephenzone said
Feb 1, 2010
thanxs. where did you get yours?
2drpost said
Feb 1, 2010
i'm doing without them. '67-'69? camaro are the same.
rarechev said
Feb 1, 2010
Steve if your not looking for new ones my parts wagon probably has good ones on it
Stephenzone said
Feb 1, 2010
what are ya doing tomorrow?
cdnpont said
Feb 1, 2010
I think the Energy pieces will be fine if your parts guy can get them.
rarechev said
Feb 1, 2010
i'll be here!
Stephenzone said
Feb 2, 2010
cdnpont wrote:
I think the Energy pieces will be fine if your parts guy can get them.
ordered plus the rear ones too and while i was at it i got new sway bar ends.
'67-'69? camaro are the same.