ill try and get some pics, the corner ones need to go on first, and the smaller ones go in the stainless slide the stainless over the end ones and put your screws in the anchor the trim in place then the coul just clips in under. at both ends there two plastic levelers most times they are broken off,they bolt under the fenders.
-- Edited by 65wagon on Friday 22nd of February 2013 01:40:08 PM
4SPEED427 said
Feb 22, 2013
Does someone have a picture of a 66 (and likely 65) full size with the cowl panel at the base of the windshield removed? I pulled mine off months ago, labeled the clips but I can't remember for nothing how the clips mount on the body at the back of the panel. I know which is right side up because of the mark on the clip from the bolt head, but it's one of 3 ways, and none make sense.
In the second picture, I show the 3 ways it could be from what I can figure. Anyone know which clip is correctly positioned?
Thanks.
4SPEED427 said
Feb 22, 2013
Or is the lower windshield stainless moulding the only thing that holds the cowl panel in place at the back?
4SPEED427 said
Feb 22, 2013
Also, one of these on each side. This should be the left.
4SPEED427 said
Feb 22, 2013
That would be great. I was hoping you or Ken would see this.
Thanks, now get to town and have a coffee with the boys!
4SPEED427 said
Feb 22, 2013
65wagon wrote:
ill try and get some pics, the corner ones need to go on first, and the smaller ones go in the stainless slide the stainless over the end ones and put your screws in the anchor the trim in place then the coul just clips in under. at both ends there two plastic levelers most times they are broken off,they bolt under the fenders.
-- Edited by 65wagon on Friday 22nd of February 2013 01:40:08 PM
Yes, the black plastics are broken off. I am assuming those are a dam to keep the water from running in the corner, down the cowl and finding it's way into the interior right in the corner of the firewall and floor pan?
A picture of the corner installed would be great because I can't figure out how it should sit.
66 Grande guy said
Feb 22, 2013
Howdy guys I'm kind of in the same boat as carl. i took my windshield out some ago and I was hoping the correct way to put it back together would magically occur to me when the time came. Thanks old 65 wagon buddy!
(I think the pastic thingys were partly to correctly line up the windshield)
Ken with the deep Feb blues.
4SPEED427 said
Feb 23, 2013
66 Grande guy wrote:
Ken with the deep Feb blues.
I was secretly hoping this post would flush you out too. You've been waaaay to silent on here. Do I have to come out there and give you a kick in the rear to get you going?
66 Grande guy said
Feb 23, 2013
I'm not depressed, just crabby. Part of my problem is that as a chronic proctrastinator i can't actully get anything done unless I have a scary deadline, even an activity as enjoyable as working on my Pontiac.
just a weird guy. I'll for sure be a blur of frantic car bashing in the middle of April though.
Maybe i need more coffee....
65wagon said
Feb 23, 2013
heres pic off the drivers side
-- Edited by 65wagon on Saturday 23rd of February 2013 12:36:16 PM
-- Edited by 65wagon on Saturday 23rd of February 2013 12:38:00 PM
-- Edited by 65wagon on Saturday 23rd of February 2013 12:39:55 PM
-- Edited by 65wagon on Saturday 23rd of February 2013 12:49:00 PM
-- Edited by 65wagon on Saturday 23rd of February 2013 01:55:32 PM
-- Edited by 65wagon on Saturday 23rd of February 2013 01:56:30 PM
ill try and get some pics, the corner ones need to go on first, and the smaller ones go in the stainless slide the stainless over the end ones and put your screws in the anchor the trim in place then the coul just clips in under. at both ends the
ill will go out after some coffee, i just crawled out of bed, it was a late night didnt get home till after midnight, we dont have aware that amount of snow.
ill try and get some pics, the corner ones need to go on first, and the smaller ones go in the stainless slide the stainless over the end ones and put your screws in the anchor the trim in place then the coul just clips in under. at both ends there two plastic levelers most times they are broken off,they bolt under the fenders.
-- Edited by 65wagon on Friday 22nd of February 2013 01:40:08 PM
In the second picture, I show the 3 ways it could be from what I can figure. Anyone know which clip is correctly positioned?
Thanks.
Thanks, now get to town and have a coffee with the boys!
Yes, the black plastics are broken off. I am assuming those are a dam to keep the water from running in the corner, down the cowl and finding it's way into the interior right in the corner of the firewall and floor pan?
A picture of the corner installed would be great because I can't figure out how it should sit.
Howdy guys I'm kind of in the same boat as carl. i took my windshield out some ago and I was hoping the correct way to put it back together would magically occur to me when the time came. Thanks old 65 wagon buddy!
(I think the pastic thingys were partly to correctly line up the windshield)
Ken with the deep Feb blues.
I was secretly hoping this post would flush you out too. You've been waaaay to silent on here. Do I have to come out there and give you a kick in the rear to get you going?
I'm not depressed, just crabby. Part of my problem is that as a chronic proctrastinator i can't actully get anything done unless I have a scary deadline, even an activity as enjoyable as working on my Pontiac.
just a weird guy. I'll for sure be a blur of frantic car bashing in the middle of April though.
Maybe i need more coffee....
-- Edited by 65wagon on Saturday 23rd of February 2013 12:36:16 PM
-- Edited by 65wagon on Saturday 23rd of February 2013 12:38:00 PM
-- Edited by 65wagon on Saturday 23rd of February 2013 12:39:55 PM
-- Edited by 65wagon on Saturday 23rd of February 2013 12:49:00 PM
-- Edited by 65wagon on Saturday 23rd of February 2013 01:55:32 PM
-- Edited by 65wagon on Saturday 23rd of February 2013 01:56:30 PM
ill try and get some pics, the corner ones need to go on first, and the smaller ones go in the stainless slide the stainless over the end ones and put your screws in the anchor the trim in place then the coul just clips in under. at both ends the
ill will go out after some coffee, i just crawled out of bed, it was a late night didnt get home till after midnight, we dont have aware that amount of snow.