Canadian Poncho

blinker switch wont blink left

SGS Welding said
Apr 28, 2014

well now I have new problems

the blinker signal switch will work if you use the lane change part of its function but not will not work when fully engaged in the left turn part of its operation

the right turn part works perfectly in both both stages

is this repairable?

or can u buy a new one?

or do you hunt till u find a good used one?

thanks in advance for your help

427carl said
Apr 28, 2014

You can buy replacements check with Kraft Car Quest in Exeter or similar ask for 67 impala don't confuse them with Pontiac

SGS Welding said
Apr 28, 2014

Carl427 I get the feeling we live close to each other! Lol! Thank you for taking the time to help me. I am getting very close to taking this car for its first run!

deleted said
Apr 28, 2014

.....since you had a horn issue in the column, and now this too, I think you just need to pull off the steering wheel and clean the mech there. It's all just abit dirty and not connecting from not being used for awhile. The signal cam can just be sprayed with a good penetrating oil like " Move It " made by Lloyds, WD40 is junk. Spray it , move the signal lever up and down a few times and I bet your signals will work fine. I doubt anything is broken there but you'll see easily enough if something is. The lever should cancel after the wheel is turned back to center after making the turn.

SGS Welding said
Apr 28, 2014

Ok that makes sense Ringo I will defiantly check it out It will have to come apart to replace it anyways So in doing so it may be salvageable Thanks again