A winter project, have one of the hide away doors on just a little off. Before I installed this spring, everything moved freely using a vacuum pump, bushings seemed snug but I did replace the rubber bumpers which stops the doors in the upper or lowered position. There doesn't appear to be a mechanical adjustment so I will probably change the vacuum lines due to age.
Has anyone had to adjust the movement of the doors? Shim the actuators? Replace the actuator?
A winter project, have one of the hide away doors on just a little off. Before I installed this spring, everything moved freely using a vacuum pump, bushings seemed snug but I did replace the rubber bumpers which stops the doors in the upper or lowered position. There doesn't appear to be a mechanical adjustment so I will probably change the vacuum lines due to age.
Has anyone had to adjust the movement of the doors? Shim the actuators? Replace the actuator?
Thanks for any input!
DO NOT KNOW ABOUT THE ADJUSTMENTS,
BUT HAD TO SAY LOVE THE FRONT END LOOK !!
The adjusting bracket (#4 ) has slots where the 2 bolts (#5) goes thru, must be the place to adjust....