There was a thread with discussion on where to locate emblems on a particular vehicle. Todd has suggested that there be a section in each of the separate forums for particular models, so I will start one in each of those sections.
If you are able to assist with specs on body emblem placement for the models in this section, please post them in this thread.
hawkeye5766 said
Dec 17, 2017
Happy to assist. Rear 1/4 Canso and Sport Deluxe emblem placement. Left side only!!!!!!!! Canso emblem is reversed on Right side!!!!
66 Canso and Sport Deluxe Emblem placement,66 only..not as sketch heading states. 67 Canso emblem was on the front fender.
-- Edited by hawkeye5766 on Wednesday 20th of December 2017 02:22:50 AM
Not necessarily pretty but I removed the 67 reference.
hawkeye5766 said
Dec 17, 2017
Carl Stevenson wrote:
Not necessarily pretty but I removed the 67 reference.
Computer white out,thanks...would have never thought!
hawkeye5766 said
Dec 17, 2017
66 SD fender louver placement,just have template.....will give measurements when I find a tape!!! Template is also out for loan if anyone needs it,just pay shipping. Too many SD`s with louvers straight up!
hawkeye5766 said
Dec 17, 2017
Rear trunk molding surround 66-67 Canso. Both years in all Canso models(Canso 2 and 4dr sedan,HT,SD etc)...if you can't read measurements let me know. Can post pics a section at a time.
66 SD front fender louver measurements. Will edit thread when I measure distance between louvers. This template will work for both sides....just put your marked side down(facing fender) on right side.
-- Edited by hawkeye5766 on Wednesday 20th of December 2017 02:33:54 AM
-- Edited by hawkeye5766 on Thursday 28th of December 2017 02:03:00 AM
Bump for ARCADIAN. Seems I left out the distance measurement between the louvers!! Will see if I can find....
-- Edited by hawkeye5766 on Wednesday 20th of December 2023 03:11:02 AM
4SPEED427 said
March 4th
Does anyone know if 66 vs 67 emblems on the 1/4 are in the same location? It seems to me they are but I cant prove it.
billy67sd said
March 4th
Gentlemen, i appreciate the drawings, looking specifically for 1967 canso quarter panel location for sport deluxe emblem....thanks again for any help
Billy
4SPEED427 said
March 4th
I'm hoping for someone to chime in here and say that 66 and 67 are the same. C'mon guys, someone's gotta know this. I bet they are but I don't want to steer you wrong!
hawkeye5766 said
March 5th
I know Carl deleted the 67 notation on the second post in this thread. But that was concerning the Canso emblem placement. 99.9 % that the SD emblem is in the same placement as 66 Sd. But the measurement posted is only for the left side !!!!!!!!!!!! Problem is that most transfer the same measurement over to the right side using the end of the "S" tail on the script to start the "C" on the other side. That does not work! The SD emblem is more forward on the right side than the left. This way the "Canso" emblem starts before the SD emblem on both sides. I know this is 66 and 67 had the "Canso" emblem on the front fender...but the 67 SD emblem mimics the 66 on the 1/4 panel. 1st pic is from orig brochure. You can see how much more forward the SD emblem is. Won't be able to give 100% on left side for 67....until I get to the Inlaws as she has a factory 67 SD
If you are able to assist with specs on body emblem placement for the models in this section, please post them in this thread.
Happy to assist. Rear 1/4 Canso and Sport Deluxe emblem placement. Left side only!!!!!!!! Canso emblem is reversed on Right side!!!!
66 Canso and Sport Deluxe Emblem placement,66 only..not as sketch heading states. 67 Canso emblem was on the front fender.
-- Edited by hawkeye5766 on Wednesday 20th of December 2017 02:22:50 AM
Computer white out,thanks...would have never thought!
66 SD fender louver placement,just have template.....will give measurements when I find a tape!!! Template is also out for loan if anyone needs it,just pay shipping. Too many SD`s with louvers straight up!
Rear trunk molding surround 66-67 Canso. Both years in all Canso models(Canso 2 and 4dr sedan,HT,SD etc)...if you can't read measurements let me know. Can post pics a section at a time.
Best to get all the measurements in the pic!
66 SD front fender louver measurements. Will edit thread when I measure distance between louvers. This template will work for both sides....just put your marked side down(facing fender) on right side.
-- Edited by hawkeye5766 on Wednesday 20th of December 2017 02:33:54 AM
-- Edited by hawkeye5766 on Thursday 28th of December 2017 02:03:00 AM
Bump for ARCADIAN. Seems I left out the distance measurement between the louvers!! Will see if I can find....
-- Edited by hawkeye5766 on Wednesday 20th of December 2023 03:11:02 AM
Billy
I'm hoping for someone to chime in here and say that 66 and 67 are the same. C'mon guys, someone's gotta know this. I bet they are but I don't want to steer you wrong!
I know Carl deleted the 67 notation on the second post in this thread. But that was concerning the Canso emblem placement. 99.9 % that the SD emblem is in the same placement as 66 Sd. But the measurement posted is only for the left side !!!!!!!!!!!! Problem is that most transfer the same measurement over to the right side using the end of the "S" tail on the script to start the "C" on the other side. That does not work! The SD emblem is more forward on the right side than the left. This way the "Canso" emblem starts before the SD emblem on both sides. I know this is 66 and 67 had the "Canso" emblem on the front fender...but the 67 SD emblem mimics the 66 on the 1/4 panel. 1st pic is from orig brochure. You can see how much more forward the SD emblem is. Won't be able to give 100% on left side for 67....until I get to the Inlaws as she has a factory 67 SD
Indeed !! But would have to get her permission and take the pics myself. Will inquire with her. Hers in on the right
Factory 327 4 speed Canso! It can't get much better than that...
With the u15 option (speed warning)!!! only Canso I've seen with one....!!