Just looking for a rear sway bar for a 65 parisienne.......stock 7/8 works good for me. Just want to tighten things up a bit.
Thanks!
Mark
4SPEED427 said
Feb 26, 2018
You are aware you can still buy a new GM one from some suppliers? GM has discontinued it but a number of guys must have stocked up.
Part #394926
65wagon said
Feb 26, 2018
hutch400 wrote:
hey folks
Just looking for a rear sway bar for a 65 parisienne.......stock 7/8 works good for me. Just want to tighten things up a bit.
Thanks!
Mark
urethane bushings help a lot , so do a decent set of springs and shocks, the bar doesn't hurt, but it does cause over steer on the rear end which means the backend can step out. bars are their for tuning not to fix bad handling just saying.
SGS Welding said
Feb 26, 2018
That Parts Place
near Chicago
use the part # Carl posted
they have it listed for a 68 to 72 Chevelle
I think
thats were I got mine
Not sure if you are aware you need to make up
a spacer kit
I had a set of plans I got off of
Chev talk I think
easy stuff
4SPEED427 said
Feb 26, 2018
I have some of those shims if someone needs measurements but there is a writeup online detailing the entire installation on our particular cars.
hey folks
Just looking for a rear sway bar for a 65 parisienne.......stock 7/8 works good for me. Just want to tighten things up a bit.
Thanks!
Mark
Part #394926
urethane bushings help a lot , so do a decent set of springs and shocks, the bar doesn't hurt, but it does cause over steer on the rear end which means the backend can step out. bars are their for tuning not to fix bad handling just saying.
That Parts Place
near Chicago
use the part # Carl posted
they have it listed for a 68 to 72 Chevelle
I think
thats were I got mine
Not sure if you are aware you need to make up
a spacer kit
I had a set of plans I got off of
Chev talk I think
easy stuff