I am looking for a pair of used 41B quadrajet primary rods. Let me know if you have anything available I'm in Manitoba.
Thanks
JC2+2 said
Sep 6, 2018
Do you know the carb number these rods come out of? Or is this an aftermarket performance part?
Pontiaca said
Sep 6, 2018
Hi JC2+2,
The 41B primary rods are a factory quadrajet part and was hoping someone on the board would have a collection of rods. I was looking at carb numbers that have the rods and there are quite a few early carbs having the 0.041" rods. Even a 76 caddy qjet has them so it's all over the place.
JC2+2 said
Sep 6, 2018
I have a Qjet for parts. I can check.
Pontiaca said
Sep 6, 2018
Than you. I have some carb number information and may be able to tell what primary rods are in your quadrajet without having to take it apart.
JC2+2 said
Sep 6, 2018
I'll pm you the number tonight.
unruhjonny said
Sep 10, 2018
FYI: 1966-1975* "70" Quadrajets use one length of primary needle (rod) while 1975-1987 "170" Quadrajets use another length primary needle (rod)
I have been collecting Quadrajet parts for a while now, but becasue most of my parts are for the "70" Quadrajets I am unfamiliar with the stamping/sizes for the "170" series quadrajets.
The attached image is from a page of the 2016 Ames catalog - maybe this will help!
Not yet as I was hoping to find north of the 49th. You know, the old make Canada great again.
unruhjonny said
Sep 10, 2018
ha!
I know i had a set, but I might have them in one of my carbs - would you have any that you could trade?
Pontiaca said
Sep 10, 2018
I have a set of 45B and a pair of 70 jets if interested. A perfect world would trade a 71 jet and a 41B rod for my 70 jets and 45B rods
-- Edited by Pontiaca on Monday 10th of September 2018 02:32:18 PM
unruhjonny said
Sep 10, 2018
rod for rod is all i had hoped for... let me look into this when I get back home (hopefully I remember to look tonight!);
I'll let you know what I find.
Pontiaca said
Sep 10, 2018
Great! And just the rods being swapped would be perfect.
Hi guys,
I am looking for a pair of used 41B quadrajet primary rods. Let me know if you have anything available I'm in Manitoba.
Thanks
The 41B primary rods are a factory quadrajet part and was hoping someone on the board would have a collection of rods. I was looking at carb numbers that have the rods and there are quite a few early carbs having the 0.041" rods. Even a 76 caddy qjet has them so it's all over the place.
FYI:
1966-1975* "70" Quadrajets use one length of primary needle (rod)
while
1975-1987 "170" Quadrajets use another length primary needle (rod)
I have been collecting Quadrajet parts for a while now, but becasue most of my parts are for the "70" Quadrajets I am unfamiliar with the stamping/sizes for the "170" series quadrajets.
The attached image is from a page of the 2016 Ames catalog - maybe this will help!
Thanks
Still looking
I can check what I have when I get home.
Have you tried Cliff Ruggles?
cliffshighperformance.com/
I know i had a set, but I might have them in one of my carbs - would you have any that you could trade?
I have a set of 45B and a pair of 70 jets if interested. A perfect world would trade a 71 jet and a 41B rod for my 70 jets and 45B rods
-- Edited by Pontiaca on Monday 10th of September 2018 02:32:18 PM
I'll let you know what I find.