The part number for the cylinder is 7031272. A locksmith can fix you up coding the tumbler.
mike667 said
Sep 12, 2020
Thanks Carl for the 1116675. Is my only luck eBay?
mike667 said
Dec 28, 2020
I have the tumbler and ignition switch in. Problem now is I need the ring/retainer that goes behind the dash that secures it in place? The previous switch was for a 63 bonneville or GTO. So with the new switch its loose behind the dash and doesnt seat properly. Looking for that ring or clip to make sure it fits tightly in place...
rebelrouser said
Jan 17, 2021
I don't know if these will work but the set w/keys is from my '67 Chevelle SS 396 4spd that I bought in '83. The empty housing is anyone's guess.
I have the ignition switch and tumbler. The only thing Im missing is that nut/piece that holds it in place in the console?? But not sure what it looks like.
a421cat said
Jan 21, 2021
If you want to come to Kitchener when the lockdown is over you can go thru. my collection of ignition switches. Should be able to find what you need.
Bill.
mike667 said
Jan 21, 2021
Thanks Bill. Ill see what else I may need and let you know. should fit in the car, not like last time
Looking for the ignition switch/tumbler.
Got new ignition key, but it's not going into the one I have assuming it's not the right tumbler.
Looking at the old tumbler numbers it looks like it was taken out of a 63/64 Bonneville
-- Edited by mike667 on Saturday 12th of September 2020 08:25:17 AM
For this config.
The part number for the cylinder is 7031272. A locksmith can fix you up coding the tumbler.
I have the tumbler and ignition switch in. Problem now is I need the ring/retainer that goes behind the dash that secures it in place? The previous switch was for a 63 bonneville or GTO. So with the new switch its loose behind the dash and doesnt seat properly. Looking for that ring or clip to make sure it fits tightly in place...
Bill.
Thanks Bill. Ill see what else I may need and let you know. should fit in the car, not like last time