Wanted: Drivers Side Seatbelt (retractor side) for 94 Chevy 3500 Pickup
Canadian Poncho said
Oct 28, 2020
Looking for a drivers seatbelt (retractor side with shoulder belt) for my 94 Chevy truck. The one I got used is wrong. Mine mounts to the floor, not the door. Prefer red to match the interior but would consider other colours. A previous owner cut out the shoulder belt portion.
Boy I looked around and right side is plentiful, drivers side looks hard to find. What about LMC, they must have it.
Canadian Poncho said
Oct 29, 2020
It appears LMC only sells a complete set.
bigdreams said
Oct 29, 2020
is it a couple of torx head bolts that hold the assembly in place?
Also in PEI is the condition of the belt a safety inspection issue ?- I know in manitoba it is - no excessive fraying - all manufacturers label attached
Canadian Poncho said
Oct 29, 2020
I haven't yet pulled the cover to see how it mounts. I will do so and let you know. Yes, the truck is up for inspection in January and it will need to have a proper, functioning undamaged belt.
timbuk said
Oct 29, 2020
if extended cab is same as regular cab i have it,it will be coast to coast though and i will have to make sure it works its red also parting out a 93 with red guts
Canadian Poncho said
Oct 29, 2020
Carl S if you are reading this can you verifiy if the seatbelts are the same between reg cab and extended? I also need a good drivers armrest.
timbuk said
Oct 29, 2020
i will look at that also passenger side just armrest just left
4SPEED427 said
Oct 29, 2020
Canadian Poncho wrote:
Carl S if you are reading this can you verifiy if the seatbelts are the same between reg cab and extended? I also need a good drivers armrest.
I can only check when I get back to the GM computer next week but I sure can then if that helps.
timbuk said
Oct 29, 2020
just compared to my 93 reg cab they are different i bet the one you have is from extended cab
timbuk said
Oct 29, 2020
have armrest looks good outside but has some broken mounting tabs
Canadian Poncho said
Oct 29, 2020
Yes, just the left armrest. I wonder if the 3500 reg cab used a different belt?
timbuk said
Oct 29, 2020
my 2500 reg cab looks same as your belt you must get one from reg cab or maybe crew cab mot ext cab im thinkin u can have armrest if worth shipping v9k2g2
Greaser said
Oct 29, 2020
Todd,
Going to PnP tomorrow morning......20 % off.
I know some of the stuff your looking for........
Send me an up to date wish list, I'll see what I can find.
Temp is up and snow has disappeared significantly here this week, so should be a good day for searching.
PnP has cross reference software at the yard.
-G
-- Edited by Greaser on Thursday 29th of October 2020 05:11:53 PM
Looking for a drivers seatbelt (retractor side with shoulder belt) for my 94 Chevy truck. The one I got used is wrong. Mine mounts to the floor, not the door. Prefer red to match the interior but would consider other colours. A previous owner cut out the shoulder belt portion.
Photo of base:
Thanks
Boy I looked around and right side is plentiful, drivers side looks hard to find. What about LMC, they must have it.
is it a couple of torx head bolts that hold the assembly in place?
Also in PEI is the condition of the belt a safety inspection issue ?- I know in manitoba it is - no excessive fraying - all manufacturers label attached
I can only check when I get back to the GM computer next week but I sure can then if that helps.
Todd,
Going to PnP tomorrow morning......20 % off.
I know some of the stuff your looking for........
Send me an up to date wish list, I'll see what I can find.
Temp is up and snow has disappeared significantly here this week, so should be a good day for searching.
PnP has cross reference software at the yard.
-G
-- Edited by Greaser on Thursday 29th of October 2020 05:11:53 PM