Looking for an antenna for 64 Parisienne. Ours has a universal one that keeps tilting and driving me crazy. I would like to find the correct one if possible or recommendations of something decent that will work.
thanks
cdnpont said
Nov 15, 2020
Mike, here's some data and images to help in the search.
Looks like a mast from 63 will work as well. Base and crown nut parts cross 63-66 in some cases.
Over the years I have collected a number of antennas and parts. Looked over what I have and found the correct black bezel for a 64 antenna. Also have a complete correct antenna from a 58 Pontiac with all the mounting hardware but think the shape of fenders are quite different so might not fit properly. Have another complete antenna but believe it is for a Chevrolet in the mid 60's. If any of these might work let me know. Thanks from Bob Tillsonburg Ontario.
Urban_suburban said
Nov 16, 2020
Yes I am interested. Please pm me so we can connect
gparis7 said
Nov 18, 2020
cdnpont wrote:
Mike, here's some data and images to help in the search.
Looks like a mast from 63 will work as well. Base and crown nut parts cross 63-66 in some cases.
64 Parisienne original mast, nut and bezel
I remember this antenna style well; it was on my aunt's 64 Strato Chief. But I have not seen one in many years.
Pontiacanada said
Nov 18, 2020
cdnpont wrote:
The base contour is what you need for the ridge in the '64 fender.
a421cat said
Nov 19, 2020
I have some of these parts including the " base washer and molded rubber " but I doubt I could build a complete antenna. You are welcome to sort through my parts next time you are in Kitchener.
Bill.
Urban_suburban said
Nov 29, 2020
Thanks everyone who helped. I have everything I need to put it together properly. And was quite surprised to find most of the parts that go inside the cowl to be there dumped in the bottom
58 poncho fan said
Nov 29, 2020
Mike glad it worked out. Nothing worse than to have a crappy antenna on a nice vehicle. Bob.
Urban_suburban said
Dec 1, 2020
Finally looks like it should and its pointing straight up rather than out to the side like a drunken sailor...
-- Edited by Urban_suburban on Tuesday 1st of December 2020 07:43:46 AM
Looking for an antenna for 64 Parisienne. Ours has a universal one that keeps tilting and driving me crazy. I would like to find the correct one if possible or recommendations of something decent that will work.
thanks
Mike, here's some data and images to help in the search.
Looks like a mast from 63 will work as well. Base and crown nut parts cross 63-66 in some cases.
64 Parisienne original mast, nut and bezel
If anything antenna new is discovered, post it here.
Good luck!
https://canadianponcho.activeboard.com/t66255613/1963-66-am-or-fm-antenna-a-post-for-antenna-info-here/?a=20&subForumID=409060&commentID=66255613
Yes I am interested. Please pm me so we can connect
I remember this antenna style well; it was on my aunt's 64 Strato Chief. But I have not seen one in many years.
The base contour is what you need for the ridge in the '64 fender.
Bill.
Mike glad it worked out. Nothing worse than to have a crappy antenna on a nice vehicle. Bob.
Finally looks like it should and its pointing straight up rather than out to the side like a drunken sailor...
-- Edited by Urban_suburban on Tuesday 1st of December 2020 07:43:46 AM
Lookin good!
Crazy how the correct antenna can complete the package. Looks good!
Bill.