Need the fitting for return hose to box, screws into box with nipple for hose. Anyone got one or know where to get one ?? Thks, Pete
4SPEED427 said
Nov 22, 2020
Is that the one with the O-ring on it?
4SPEED427 said
Nov 22, 2020
If so, Edelman 39106 or 39108 for straight or 90 degree?
dualquadpete said
Nov 23, 2020
looks like it has a "seat" in box?? not O ring style
4SPEED427 said
Nov 23, 2020
If it's not O-ring style and it's 3/8" steel pipe, go to the auto parts store, buy a 3/8" flared pipe with the nuts on there, cut one nut off (sounds painful...) put a little flare on the smooth end to retain the hose where you clamp it and Bob's-your-uncle.
65Camino said
Nov 23, 2020
My uncle Bob would say to buy a hose from the actual application it came out of. Then adapt to fit yours.
OURWAGON said
Nov 23, 2020
4SPEED427 wrote:
If it's not O-ring style and it's 3/8" steel pipe, go to the auto parts store, buy a 3/8" flared pipe with the nuts on there, cut one nut off (sounds painful...) put a little flare on the smooth end to retain the hose where you clamp it and Bob's-your-uncle.
I GOT THEM FROM CARQUEST, FUEL FILTER REPAIR FITTINGS.
dualquadpete said
Nov 23, 2020
65Camino wrote:
My uncle Bob would say to buy a hose from the actual application it came out of. Then adapt to fit yours.
It,s not the hose I need, it's the fitting for return line to box!!!
dualquadpete said
Nov 23, 2020
OURWAGON wrote:
4SPEED427 wrote:
If it's not O-ring style and it's 3/8" steel pipe, go to the auto parts store, buy a 3/8" flared pipe with the nuts on there, cut one nut off (sounds painful...) put a little flare on the smooth end to retain the hose where you clamp it and Bob's-your-uncle.
I GOT THEM FROM CARQUEST, FUEL FILTER REPAIR FITTINGS.
OK I'll check that out, I may even have one of those " Somewhere"????
The application is 1978 Malibu. Straight or 90 available. Paul
65Camino said
Nov 24, 2020
triplequadpete wrote:
65Camino wrote:
My uncle Bob would say to buy a hose from the actual application it came out of. Then adapt to fit yours.
It,s not the hose I need, it's the fitting for return line to box!!!
Should have posted. Get the hose assembly with the fitting. Usually just comes with the fitting for the box. Then hose clamp the other end to the box. My mistake.
-- Edited by 65Camino on Tuesday 24th of November 2020 03:53:23 PM
seventy2plus2 said
Nov 24, 2020
Or try this. Napa part # PSH 71201 Power Steering Return Hose for my 70, same as many years.
Need the fitting for return hose to box, screws into box with nipple for hose. Anyone got one or know where to get one ?? Thks, Pete
My uncle Bob would say to buy a hose from the actual application it came out of. Then adapt to fit yours.
I GOT THEM FROM CARQUEST, FUEL FILTER REPAIR FITTINGS.
It,s not the hose I need, it's the fitting for return line to box!!!
OK I'll check that out, I may even have one of those " Somewhere"????
Rock auto. But you could probably make one.
The application is 1978 Malibu. Straight or 90 available. Paul
Should have posted. Get the hose assembly with the fitting. Usually just comes with the fitting for the box. Then hose clamp the other end to the box. My mistake.
-- Edited by 65Camino on Tuesday 24th of November 2020 03:53:23 PM
www.napacanada.com/en/p/PSQ71201
Has the bent end that screws into your steering box, and a length of hose on it.