Anyone have any B Body rear bushings sitting collecting dust?
cdnpont said
Jan 30, 2021
Anyone have any rear suspension bushings they might part with? 65 B Body. The ones you never used?
I know they are all available new, but thought I'd ask here. You never know.
Need 8. 6 uppers and the rear lower are the same bushing. Not sure what I'll need for the lower front. I think it's 67 lower arms that I'm reconditioning for the 65. Lists the same as 65.
Rock auto lists the 009 for all the uppers and the lower rear. The 005 for the lower forward.
a421cat said
Jan 31, 2021
Any chance of getting measurements. I have some random bushings without boxes.
Thanks for measurements Mark. I will fire up my vernier this aft.
Bill.
cdnpont said
Jan 31, 2021
Thanks Bill!
68 Grande said
Jan 31, 2021
I have three boxes (6) of 009 and 1 box of 005 (2) here. I was intending to install them in the 68 for the last three years but so far they are on the shelf.
If you need them I can send them your way but at some point I will change mine out so I would be just re-ordering again? Doesn't make much sense doing that, no?
cdnpont said
Jan 31, 2021
Yes, just hang onto them. I actually find the easiest way to do these...is to have a second set of arms available.
Go at you own pace getting the arms cleaned up, painted and the bushings installed. Then go in, and in an afternoon your done.
jduffett said
Jan 31, 2021
I have 4x Moog K6075 which looks to match up with AC Delco 45G11009, and I have 2x Centric 60262047, which looks to match up with AC Delco 45G11005. I had bought these to do mine (10 bolt, hence I'm short a couple), but have since collected some aftermarket control arms, your 12 bolt housing, etc...
I also have a pair of lower front control arm bushings that I ended up with because I couldn't get bolts separately, if they're of any use to you.
cdnpont said
Jan 31, 2021
pm sent
cdnpont said
Feb 2, 2021
Well, good member Jduffett came through. Thanks a ton John!
Just need two more of the larger K6057's and I'm good on bushings.
Edit; just found two of the 6057. So I'm good! thanks guys.
-- Edited by cdnpont on Tuesday 9th of February 2021 08:29:06 PM
Anyone have any rear suspension bushings they might part with? 65 B Body. The ones you never used?
I know they are all available new, but thought I'd ask here. You never know.
Need 8. 6 uppers and the rear lower are the same bushing. Not sure what I'll need for the lower front. I think it's 67 lower arms that I'm reconditioning for the 65. Lists the same as 65.
Rock auto lists the 009 for all the uppers and the lower rear. The 005 for the lower forward.
Bill.
Upper and lower rear, 1109,
Lower forward, 1105,
Bill.
Thanks Bill!
If you need them I can send them your way but at some point I will change mine out so I would be just re-ordering again? Doesn't make much sense doing that, no?
Yes, just hang onto them. I actually find the easiest way to do these...is to have a second set of arms available.
Go at you own pace getting the arms cleaned up, painted and the bushings installed. Then go in, and in an afternoon your done.
I have 4x Moog K6075 which looks to match up with AC Delco 45G11009, and I have 2x Centric 60262047, which looks to match up with AC Delco 45G11005. I had bought these to do mine (10 bolt, hence I'm short a couple), but have since collected some aftermarket control arms, your 12 bolt housing, etc...
I also have a pair of lower front control arm bushings that I ended up with because I couldn't get bolts separately, if they're of any use to you.
pm sent
Well, good member Jduffett came through. Thanks a ton John!
Just need two more of the larger K6057's and I'm good on bushings.
Edit; just found two of the 6057. So I'm good! thanks guys.
-- Edited by cdnpont on Tuesday 9th of February 2021 08:29:06 PM