looking for a heater blower switch for my 67 beaumont if anybody has an extra one they can part with
4SPEED427 said
Feb 15, 2021
I'm not sure how much this helps but the GM number you need is 7293476 (AC Delco number 15-7191) and I can only prove it fits 66-67 Beaumont and Tempest/Lemans/GTO.
crazytrain said
Feb 15, 2021
thanks for the info
4SPEED427 said
Feb 15, 2021
I should mention, I suspect it will only fit the Lemans series if the car has no A/C. Your switch is 3 speed, right? It seems to me the A/C cars have 4 fan speeds.
crazytrain said
Feb 15, 2021
not sure if mine is a 3 speed as the switch was missing when i got the car, my car is non ac though
beaumontguru said
Feb 15, 2021
Is it the same as a 64-65. if so i probably have one. can anyone confirm?
4SPEED427 said
Feb 15, 2021
Dave, the parts book says it's not the same as the 64-65 switch.
beaumontguru said
Feb 15, 2021
You are right. the 67 is different, arm has a different bend and the pin config is different
This is the only 67 one i have but the back pin is loose. it works, but you would have to take it apart and repair it a bit.
I probably have a 66 one. Not sure when I will have time to take a look. Some people are trying to put me to work.
4SPEED427 said
Feb 15, 2021
jmont64 wrote:
Some people are trying to put me to work.
Well you best explain to them what "retired" means...
Dave, 64-65 has the same number of terminals I assume? That would be a simple thing to work around. Does it mount the same?
crazytrain said
Feb 15, 2021
beaumontguru hooked me up with one
beaumontguru said
Feb 15, 2021
I compared the heater control housings and they are different! 64/65 is flat and 67 is angled, so the switch sits on a different angle thus the lever is tilted on the switch itself as well as the terminals being in a different config, those 1967s, millions of differences over the earlier years!!!
I suppose 66 would be teh same as 67, but i dont own a 66 and never have.
4SPEED427 said
Feb 15, 2021
Yes, the parts book says 66-67 switch is the same part #.
looking for a heater blower switch for my 67 beaumont if anybody has an extra one they can part with
Is it the same as a 64-65. if so i probably have one. can anyone confirm?
You are right. the 67 is different, arm has a different bend and the pin config is different
This is the only 67 one i have but the back pin is loose. it works, but you would have to take it apart and repair it a bit.
Well you best explain to them what "retired" means...
Dave, 64-65 has the same number of terminals I assume? That would be a simple thing to work around. Does it mount the same?
I compared the heater control housings and they are different! 64/65 is flat and 67 is angled, so the switch sits on a different angle thus the lever is tilted on the switch itself as well as the terminals being in a different config, those 1967s, millions of differences over the earlier years!!!
I suppose 66 would be teh same as 67, but i dont own a 66 and never have.