I am looking for a few '69 full size, front sheet metal parts in solid, unbent condition.
PART #10, #11, #16, & #17 as noted in the diagram. I NEED parts #10 and #11 for both sides. Part #16 is optional for both sides, as the ones I have will work. Part #17 on the passenger side is usable, but I NEED a driver's side. If someone has complete sets for both sides, I will take them. A couple of them my be a long shot, but you don't know until you ask! Also, looking for radiator core support brackets, for both sides, where the bottom large hole that mounts to the frame is not rusted out. These are used on the Impala too. Thanks for any help with this!
Howmac said
Jun 6, 2021
I'll have a look in my parts bins for you tomorrow . I should have most of it including the rad support gussets
gtodrive said
Jun 7, 2021
Thanks Howard! Looking forward to what you find!
Howmac said
Jun 7, 2021
Sorry , I've just spent over an hour , and I can not find any of these parts ... Simply baffling ... Driving me nuts as i knew I had them . I must be missing a box in my storage building .
I'll keep looking , but as it stands now , I have nothing . Can anyone else help ?
gtodrive said
Jun 7, 2021
Thanks for the effort Howard!! I hate when that happens! You know you have them, but cant find them! They are always in the place you didnt look! If anyone else can help out, I would appreciate it!
ABC123 said
Jun 7, 2021
Do you think those parts may have been eliminated sometime during the 1969 model year ?
I didn't remember those parts on my front end.
A good reason to be on a cool shop floor on a hot day
Of course this car had a life before but look below,
This is the Valance that Mark gave me a few years ago. Note the clip where I think part #10 secures.
Now on my car and the one I had before, There is a hard rubber coated stud. Pressed in, no clip. It fits in the eye hole of the bumper.
and like my father before me, bent back to stop an annoying rattle.
Another mid year change ?
Check your valance, I'm curious of whether you have the clip or a stud.
Appreciate you getting "cool" on the garage floor! My car was produced in November of '68, so I can't speak to any mid-year changes. My valance has a clip in it and all the mounting spots for the parts I am seeking. It seems like overkill for mounting a valance. I was looking through the assembly manual that Carl so painstakingly reproduced, (THANKS CARL!!) and noticed I did not have part #10 & #11 on the car. The mounting holes are there, but not the parts. I am removing the valance for a re-paint and thought it would be nice putting it back together the way it came from the factory. It would be interesting to know how many others with '69 full-size cars, have or don't have these parts installed. Thanks for the pictures Randy!
ABC123 said
Jun 7, 2021
Hello North !
Are you reading this ?
What does the American valance have ???
gtodrive said
Jun 12, 2021
Bumping this as a last request attempt. If these parts are considered "obscure", I know that part #17 is more common. I would like to get a nice pair of these, but would settle for a nicer driver side one, than the one I have. Anybody?? Thanks!
bigdreams said
Jun 12, 2021
hi - i posted a couple of pictures of an assembly my friend has earlier in this thread - it doesn't have the front valence
i can try to get over to take a a look at it this coming week to see if it has any of the stuff you are looking for
Don
gtodrive said
Jun 12, 2021
Thanks Don. Appreciate it! I am not in a hurry for the parts, would just like to know if someone knows a place they can get them.
-- Edited by gtodrive on Saturday 12th of June 2021 09:43:10 AM
Howmac said
Jun 12, 2021
****UPDATE**** I found a pair of the splash shields ( L/R) , but only one of the small brackets . Will get you pictures tomorrow .
Still looking for a pair of rad support gussets
seventy2plus2 said
Jun 12, 2021
Let me take a look for the rad support gussets. I had a set from the 69 I parted out for the chassis, but think I tossed them. I think they're different than the ones for 70.
gtodrive said
Jun 12, 2021
Howmac wrote:
****UPDATE**** I found a pair of the splash shields ( L/R) , but only one of the small brackets . Will get you pictures tomorrow .
Still looking for a pair of rad support gussets
Thats great Howard! Thanks!
gtodrive said
Jun 12, 2021
seventy2plus2 wrote:
Let me take a look for the rad support gussets. I had a set from the 69 I parted out for the chassis, but think I tossed them. I think they're different than the ones for 70.
Thanks Clint! Yes, they are different for 1970.
Howmac said
Jun 13, 2021
This is what I have found so far ....
one only - #10
one only - #16
pair of - #17 ( L/R)
I can ship these now , but if you want to wait and in are no rush , I may find more of the other items . Please PM me with your address in the US ..... Howard
Those look great! Thanks! I am not in a hurry, so Ill wait it out to see what other gems you can find! PM sent.
-- Edited by gtodrive on Sunday 13th of June 2021 02:43:55 PM
seventy2plus2 said
Jun 13, 2021
gtodrive wrote:
seventy2plus2 wrote:
Let me take a look for the rad support gussets. I had a set from the 69 I parted out for the chassis, but think I tossed them. I think they're different than the ones for 70.
Thanks Clint! Yes, they are different for 1970.
I looked where they would be, but they're absent. I think I pitched them.
There is a possibility they might be in one last place, but I won't have a chance to check there for a week or so. It's not looking good.
gtodrive said
Jun 13, 2021
seventy2plus2 wrote:
gtodrive wrote:
seventy2plus2 wrote:
Let me take a look for the rad support gussets. I had a set from the 69 I parted out for the chassis, but think I tossed them. I think they're different than the ones for 70.
Thanks Clint! Yes, they are different for 1970.
I looked where they would be, but they're absent. I think I pitched them.
There is a possibility they might be in one last place, but I won't have a chance to check there for a week or so. It's not looking good.
Appreciate you checking Clint! Thanks!
gtodrive said
Jun 29, 2021
Howmac wrote:
This is what I have found so far ....
one only - #10
one only - #16
pair of - #17 ( L/R)
I can ship these now , but if you want to wait and in are no rush , I may find more of the other items . Please PM me with your address in the US ..... Howard
So....a little patience paid off for me and Howard! Found these waiting for me this afternoon:
MUCH better than I expected! Packing quality and shipping speed is excellent! MUCH thanks to you Howard! You are one of the good ones to deal with, especially when it comes to a guy in the states needing Canadian-only made parts!
I still am in need of one more #10 - (Brace, valance to core support) and (2) #11 - (Support, valance to impact bumper bar), which may be next to impossible to find. If anyone spots these parts in their future salvage yard visits, please grab them as you've got an appreciative paying customer! Thanks!
I am looking for a few '69 full size, front sheet metal parts in solid, unbent condition.
PART #10, #11, #16, & #17 as noted in the diagram. I NEED parts #10 and #11 for both sides. Part #16 is optional for both sides, as the ones I have will work. Part #17 on the passenger side is usable, but I NEED a driver's side. If someone has complete sets for both sides, I will take them. A couple of them my be a long shot, but you don't know until you ask! Also, looking for radiator core support brackets, for both sides, where the bottom large hole that mounts to the frame is not rusted out. These are used on the Impala too. Thanks for any help with this!
Thanks Howard! Looking forward to what you find!
I'll keep looking , but as it stands now , I have nothing . Can anyone else help ?
Thanks for the effort Howard!! I hate when that happens! You know you have them, but cant find them! They are always in the place you didnt look! If anyone else can help out, I would appreciate it!
Do you think those parts may have been eliminated sometime during the 1969 model year ?
I didn't remember those parts on my front end.
A good reason to be on a cool shop floor on a hot day
Of course this car had a life before but look below,
This is the Valance that Mark gave me a few years ago. Note the clip where I think part #10 secures.
Now on my car and the one I had before, There is a hard rubber coated stud. Pressed in, no clip. It fits in the eye hole of the bumper.
and like my father before me, bent back to stop an annoying rattle.
Another mid year change ?
Check your valance, I'm curious of whether you have the clip or a stud.
a friend of mine has this assembly
if i get time this week i will go over and check and see if it has any of the needed parts
Appreciate you getting "cool" on the garage floor! My car was produced in November of '68, so I can't speak to any mid-year changes. My valance has a clip in it and all the mounting spots for the parts I am seeking. It seems like overkill for mounting a valance. I was looking through the assembly manual that Carl so painstakingly reproduced, (THANKS CARL!!) and noticed I did not have part #10 & #11 on the car. The mounting holes are there, but not the parts. I am removing the valance for a re-paint and thought it would be nice putting it back together the way it came from the factory. It would be interesting to know how many others with '69 full-size cars, have or don't have these parts installed. Thanks for the pictures Randy!
Are you reading this ?
What does the American valance have ???
Bumping this as a last request attempt. If these parts are considered "obscure", I know that part #17 is more common. I would like to get a nice pair of these, but would settle for a nicer driver side one, than the one I have. Anybody?? Thanks!
hi - i posted a couple of pictures of an assembly my friend has earlier in this thread - it doesn't have the front valence
i can try to get over to take a a look at it this coming week to see if it has any of the stuff you are looking for
Don
Thanks Don. Appreciate it! I am not in a hurry for the parts, would just like to know if someone knows a place they can get them.
-- Edited by gtodrive on Saturday 12th of June 2021 09:43:10 AM
****UPDATE**** I found a pair of the splash shields ( L/R) , but only one of the small brackets . Will get you pictures tomorrow .
Still looking for a pair of rad support gussets
Thats great Howard! Thanks!
Thanks Clint! Yes, they are different for 1970.
This is what I have found so far ....
one only - #10
one only - #16
pair of - #17 ( L/R)
I can ship these now , but if you want to wait and in are no rush , I may find more of the other items . Please PM me with your address in the US ..... Howard
Those look great! Thanks! I am not in a hurry, so Ill wait it out to see what other gems you can find! PM sent.
-- Edited by gtodrive on Sunday 13th of June 2021 02:43:55 PM
I looked where they would be, but they're absent. I think I pitched them.
There is a possibility they might be in one last place, but I won't have a chance to check there for a week or so. It's not looking good.
Appreciate you checking Clint! Thanks!
So....a little patience paid off for me and Howard! Found these waiting for me this afternoon:
MUCH better than I expected! Packing quality and shipping speed is excellent! MUCH thanks to you Howard! You are one of the good ones to deal with, especially when it comes to a guy in the states needing Canadian-only made parts!
I still am in need of one more #10 - (Brace, valance to core support) and (2) #11 - (Support, valance to impact bumper bar), which may be next to impossible to find. If anyone spots these parts in their future salvage yard visits, please grab them as you've got an appreciative paying customer! Thanks!