Got speedo cluster out of 74 Grandville & I'm missing the vent tube from heater AC box to left upper dash vent It's round coming out of box & I believe in goes under strg. column [ flat section] then back up to vent with square end, to fit vent. this may be made out of black plastic. could "possibly" be the same as a Chev, Buick, Olds??? Tried Frank's Pontiac in California but they will only sell complete heater A/C as a unit!! Maybe Carl can cross it up?? Thks Pete
4SPEED427 said
Feb 11, 2023
If you don't hear back from me by the end of the day tomorrow just put up a reminder here please Pete. Unless someone is able to help you out sooner.
gparis7 said
Feb 12, 2023
There are two of these vents. Which side do you need? Do you have a picture of the one you have for comparison. I have one for each side from and AC-equipped GM B-Body. I can check them. I had them for my 73 Biscayne but I have since sold the car.
dualquadpete said
Feb 13, 2023
I don't have any pictures, but need left side to dash vent & centre floor vent too! if you can take a picture of yours it may make sense??
Carl i would say 21 & 22 but shape in diagram is different on each end?? is that for 74 or just a generic or all, Pete
4SPEED427 said
Feb 14, 2023
To answer the generic part I would say this should be the correct illustration. #21 is 487009 and fits 72-76 full size Pontiac, any model, no other GM vehicle. #22 is 481321 and fits 71-76 full size Pontiac, any model, and no other GM vehicle.
gparis7 said
Feb 14, 2023
The ones I have do not look anything like the ones in the illustration that Carl supplied. Mine came from a 72 Caprice 4 door with a 402 and AC.
dualquadpete said
Feb 14, 2023
my upper left vent is vertical on back!! #22 is horizontal to vent?? # 21 is close but where mine goes onto "box" on right side of strg. column is oval not square ??? Hmmm??? Mine has A/C any difference there?
dualquadpete said
Feb 16, 2023
dualquadpete wrote:
Carl i would say 21 & 22 but shape in diagram is different on each end?? is that for 74 or just a generic or all, Pete
Looking at this diagram again, # 23 would likely be the one I need as it could be ? positioned to fit vertical dash vent [ I think] but need pc. under column too
dualquadpete said
Feb 16, 2023
dualquadpete wrote:
dualquadpete wrote:
Carl i would say 21 & 22 but shape in diagram is different on each end?? is that for 74 or just a generic or all, Pete
Looking at this diagram again, # 23 would likely be the one I need as it could be ? positioned to fit vertical dash vent [ I think] but need pc. under column too!!!
Going to try VAAVOOM in Manitoba, from Old autos before calling more wreckers in USA
dualquadpete said
Feb 16, 2023
dualquadpete wrote:
dualquadpete wrote:
dualquadpete wrote:
Carl i would say 21 & 22 but shape in diagram is different on each end?? is that for 74 or just a generic or all, Pete
Looking at this diagram again, # 23 would likely be the one I need as it could be ? positioned to fit vertical dash vent [ I think] but need pc. under column too!!!
Going to try VAAVOOM in Manitoba, from Old autos before calling more wreckers in USA Will a Canadian Pontiac be the same???
Seller said he had them!! then called back & said he hasn't got them??? Working with CTC Auto Ranch in Texas, they sent me a picture of car with ducts still in it!! closed yesterday so will call on Monday!! I figured out why their missing!! Somewhere in cars history , speakers were installed under dash & ducts "in the way" so removed them???
Prefectca said
Feb 19, 2023
If the duct was removed to install speakers, are the passenger side ducts still there? Just thinking if the parts are coming from the States it would be better to make sure that you get everything you need in one order.
Paul
dualquadpete said
Mar 16, 2023
Got them from CTC Auto Ranch and had them shipped to West Virginia as my friends were coming up for visit {arrived this week] and brought these and a "header w/strip I ordered from a company in Florida, way cheaper than any I found up here even with exchange and shipping to WV [$66 US & $20 UPS] compared to over $200 Cdn + shipping!! Will get at installing them and my clock came back from "Clock works" in Wisconsin after Quartz conversion!! Got banged another $30 in HST { thank you JUSTIN} &$#! had to censor that!!!!
Got speedo cluster out of 74 Grandville & I'm missing the vent tube from heater AC box to left upper dash vent It's round coming out of box & I believe in goes under strg. column [ flat section] then back up to vent with square end, to fit vent. this may be made out of black plastic. could "possibly" be the same as a Chev, Buick, Olds??? Tried Frank's Pontiac in California but they will only sell complete heater A/C as a unit!! Maybe Carl can cross it up?? Thks Pete
There are two of these vents. Which side do you need? Do you have a picture of the one you have for comparison. I have one for each side from and AC-equipped GM B-Body. I can check them. I had them for my 73 Biscayne but I have since sold the car.
I don't have any pictures, but need left side to dash vent & centre floor vent too! if you can take a picture of yours it may make sense??
Pete, does this picture show what you need?
Carl i would say 21 & 22 but shape in diagram is different on each end?? is that for 74 or just a generic or all, Pete
The ones I have do not look anything like the ones in the illustration that Carl supplied. Mine came from a 72 Caprice 4 door with a 402 and AC.
Looking at this diagram again, # 23 would likely be the one I need as it could be ? positioned to fit vertical dash vent [ I think] but need pc. under column too
Going to try VAAVOOM in Manitoba, from Old autos before calling more wreckers in USA
This popped up on my Kijiji feed
https://www.kijiji.ca/v-other-auto-parts-and-accessories/city-of-toronto/1972-1973-1974-1975-1976-pontiac-full-size-parts-see-ad-detai/1446441171?utm_campaign=socialbuttons&utm_content=app_ios&utm_medium=social&utm_source=sms
Paul