Is this a good price for a 12 bolt 3-Series Eaton Posi ?
LandShark68_2+2 said
Aug 3, 2023
Hi guys,
I've been thinking about upgrading my rearend from a non-posi 2.56 to a posi 3.08.
I came across this fella selling this slightly used Eaton Posi. Is this a good price ? He suggested they're about 900 new.
Regards, Scott (LandShark ...)
seventy2plus2 said
Aug 3, 2023
I'd say that's a good price, hopefully it's not junk inside. FYI - 12 bolt ratio is 3.07:1.
4SPEED427 said
Aug 3, 2023
seventy2plus2 wrote:
I'd say that's a good price, hopefully it's not junk inside. FYI - 12 bolt ratio is 3.07:1.
Plus one on that.
seventy2plus2 said
Aug 3, 2023
3 series posi carriers are ALWAYS of interest. I have a couple 2 series posi carriers, as I want to go a little higher with my rear gears, from 3.07 open to 2.73 posi (using a carrier that had 2.73 open). I ended up buying a 4 series posi case for the internals. I opened it up and everything inside looked ok, so it was cleaned, re-lubed and reassembled into the 2 series carrier. I've only gotten as far as putting the 2.73 ring on it, but am yet to reinstall it in the housing that once had the 2.73 open in it.
blkl36 said
Aug 5, 2023
new is about 850 so if its in good shape pull the pin.
Hi guys,
I've been thinking about upgrading my rearend from a non-posi 2.56 to a posi 3.08.
I came across this fella selling this slightly used Eaton Posi. Is this a good price ? He suggested they're about 900 new.
Regards, Scott (LandShark ...)
Plus one on that.