Looking for a pair of Custom Sport front fender emblems for a 1965 Parisienne.
1965CS said
Sep 23, 2023
These are extremely difficult to find, especially in decent condition. But, I have a few beat up, crusty and pitted sets somewhere that could be salvaged if you have the time, inclination, money and or know of a place that can restore them.
Will let you know if I can find them.
ROSIES CAR said
Sep 23, 2023
I found this in a pile of Pontiac parts I acquired along my travels it has no mounting studs but it looks fairly good
Anything is better than what i have now. Which is nothing. Lol. I am in Edmonton.
Pechetr said
Sep 24, 2023
I will take it please. Just let me know what you want for it including postage to Edmonton.
ROSIES CAR said
Sep 24, 2023
Darn, wish I had known 20 min ago, I just came back from post office after dropping off a couple items for another member.
PM me $20.00 postage included
CdnGMfan said
Sep 27, 2023
I believe the Custom Sport badges were the same 1964 - 66.
i have these but one is two inches shorter than the other. The short one is 8 1/4 inches and the long one is 10 1/4. The long one has a part number on it 5738322
I believe the Custom Sport badges were the same 1964 - 66.
65-66 were the same but 64 was larger and more inline.
1965CS said
Sep 28, 2023
flatop wrote:
i have these but one is two inches shorter than the other. The short one is 8 1/4 inches and the long one is 10 1/4. The long one has a part number on it 5738322
That shorter one is likely the trunk emblem. Same shape but smaller and also a rare one.
Pritch said
Sep 28, 2023
Steve is correct. '64 is a one year only shape and size.
1965CS said
Sep 28, 2023
Frustrated as I can't seem to find the emblems anywhere! Anyway, here is a reference pic of the trunk emblem for 65-66
The 8 inch you show is the opposite of the one i have,my S is touching custom,yours is away.My red area is smooth ,yours has the bars like my 10 inch ???Any help with that number 5738322 is much appreciated {10 inch}.
-- Edited by flatop on Friday 29th of September 2023 03:29:51 PM
-- Edited by flatop on Friday 29th of September 2023 08:06:55 PM
norontcan said
Sep 29, 2023
Here's the original trunk emblem on my '65 CS The two sections are attached only at the bottom tip of the S. The red Custom rectangle is ribbed. Total lenght is 8 1/4" long. Parts book says it's part number 5727506 which also shows as fitting 1966 ( 1964 number is 5734805)
Note: the part number for the 64 trunk emblem has been corrected.
Here's the original front fender emblem off my '65 CS. The two sections are attached only at the bottom tip of the S. The red Custom rectangle is ribbed, Total length is 10 1/4" long. Parts book says it's part number 5738322 which also shows as fitting 1966 ( 1964 number is 5734804 )
-- Edited by norontcan on Friday 29th of September 2023 04:37:05 PM
-- Edited by norontcan on Saturday 30th of September 2023 10:38:36 AM
Those are the ones If any of you have some for sale, PM me please.
Pechetr said
Sep 29, 2023
I also have some 65 Parisienne trim pieces if anyone is interested?
1965CS said
Sep 29, 2023
flatop wrote:
The 8 inch you show is the opposite of the one i have,my S is touching custom,yours is away.My red area is smooth ,yours has the bars like my 10 inch ???Any help with that number 5738322 is much appreciated {10 inch}.
-- Edited by flatop on Friday 29th of September 2023 03:29:51 PM
-- Edited by flatop on Friday 29th of September 2023 08:06:55 PM
I believe the top one is a 64, possibly the trunk emblem, and the lower one is a 65-66 fender emblem. The 'custom' on 64 were smooth and on 65-66 were ribbed.
flatop said
Sep 30, 2023
Thanks to 1965CS AND Norontcan for taking the time.
Chris1966 said
Nov 15, 2023
Still have these ? For sale
Pechetr said
Nov 17, 2023
Hello again,
One of the emblems I purchased is too large. Does anyone still have one available for the 65 front fender?
These are extremely difficult to find, especially in decent condition. But, I have a few beat up, crusty and pitted sets somewhere that could be salvaged if you have the time, inclination, money and or know of a place that can restore them.
Will let you know if I can find them.
I found this in a pile of Pontiac parts I acquired along my travels it has no mounting studs but it looks fairly good
Anything is better than what i have now. Which is nothing. Lol. I am in Edmonton.
I will take it please. Just let me know what you want for it including postage to Edmonton.
PM me $20.00 postage included
65-66 were the same but 64 was larger and more inline.
That shorter one is likely the trunk emblem. Same shape but smaller and also a rare one.
Frustrated as I can't seem to find the emblems anywhere! Anyway, here is a reference pic of the trunk emblem for 65-66
I'm going to have to change my beliefs![wink wink](https://www.sparklit.com/secure/image/emoticons/wink.gif)
Thank You for the clarification. I remain teachable.
The 8 inch you show is the opposite of the one i have,my S is touching custom,yours is away.My red area is smooth ,yours has the bars like my 10 inch ???Any help with that number 5738322 is much appreciated {10 inch}.
-- Edited by flatop on Friday 29th of September 2023 03:29:51 PM
-- Edited by flatop on Friday 29th of September 2023 08:06:55 PM
Here's the original trunk emblem on my '65 CS
The two sections are attached only at the bottom tip of the S. The red Custom rectangle is ribbed. Total lenght is 8 1/4" long.
Parts book says it's part number 5727506 which also shows as fitting 1966 ( 1964 number is 5734805)
Note: the part number for the 64 trunk emblem has been corrected.
Here's the original front fender emblem off my '65 CS.
The two sections are attached only at the bottom tip of the S. The red Custom rectangle is ribbed, Total length is 10 1/4" long.
Parts book says it's part number 5738322 which also shows as fitting 1966 ( 1964 number is 5734804 )
-- Edited by norontcan on Friday 29th of September 2023 04:37:05 PM
-- Edited by norontcan on Saturday 30th of September 2023 10:38:36 AM
I believe the top one is a 64, possibly the trunk emblem, and the lower one is a 65-66 fender emblem. The 'custom' on 64 were smooth and on 65-66 were ribbed.
Still have these ? For sale
One of the emblems I purchased is too large. Does anyone still have one available for the 65 front fender?