I used Moog on my 70 Parisienne and 70 2+2 convertible.
-- Edited by seventy2plus2 on Friday 15th of March 2024 08:20:23 PM
LT1Caddy said
March 15th
Don't think you can go wrong with Moog or TRW
4SPEED427 said
March 15th
I always use AC Delco chassis stuff. I know they don't make their own stuff but until I have a bad experience with their product I'll stick with them. It's been too good for too long to change!
ABC123 said
March 16th
For AC Delco, always look for AC Delco Professional
But I could not find ball joints with that class.
AC Delco Gold or Silver
SGS Welding said
March 17th
I used Moog and have had 0 issues
The fellow at NAPA told me there house brand was made by Moog
I insisted on Genuine Moog
the NAPA parts were cheaper to buy
not sure if the NAPA parts were constructed cheaper?
hope that helps
flatop said
March 17th
the Moog are $35 at rock auto right now all 4 delivered to Thunder bay was $175 ,bought today.
1965CS said
March 18th
Also used Moog with no issues yet, but also not a lot of miles yet either.
Been a long while since I've last bought upper and lower ball joints for the 65-70 B.
What parts are you using today? Still going with the Moog K6034 and 35 or is there another preferred brand now?
There was a time where there was a spate of aftermarket joints prematurely wearing out. In particular the lower if not mistaken.
Thanks, Mark
I ordered, Proforged Chassis Parts 101-10039 Proforged Ball Joints | Summit Racing
I don't know if they are better or not
I used Moog on my 70 Parisienne and 70 2+2 convertible.
-- Edited by seventy2plus2 on Friday 15th of March 2024 08:20:23 PM
For AC Delco, always look for AC Delco Professional
But I could not find ball joints with that class.
AC Delco Gold or Silver
I used Moog and have had 0 issues
The fellow at NAPA told me there house brand was made by Moog
I insisted on Genuine Moog
the NAPA parts were cheaper to buy
not sure if the NAPA parts were constructed cheaper?
hope that helps
Also used Moog with no issues yet, but also not a lot of miles yet either.