As far as I know, Canadian dealerships did not join the US when it came to factory lightweight drag car sponsorships. My Dad & I have started a "What if" Canadian version with this '63 Parisienne. Dad bought the car originally in 1986, we drove it for a couple years until it was sold. Several years later I purchased it back. My girlfriend (now wife) & I drove the car until we started a family(3 daughters) who are all now in their 20's. After many years and two other Canadian Pontiac builds later it was time to bring this '63 back out but with a different spin. It is the first car we've built where the goal wasn't to get it as low as possible. Full Global West tubular rear suspension with the added upper control arm. For now running an era correct "P" case posi rear but plans for a 9" when budget allows. Ball joint and coil spring spacers out front should give us a nose up stance. Picked up a 383 Stroker long block from a good friend to which we will be replacing most of the top end. Would like to hit close to 500hp with it . We have an aluminum glide however the car will likely see the street more than the track so it is possible we will end up stuffing a built 700R4 in. Dads garage was nicknamed Four Corners Garage years ago so that will be prominent on the rear quarters. Large PONTIAC lettering along with logo will be painted on the doors. Local dealership Howard & White Motors will also be painted on doors. Lucky enough to have found an NOS Super Duty scoop which will be on the hood. Having a great time working on this with my Dad 38 years from the first time it entered our family.
-- Edited by Str8six on Tuesday 9th of April 2024 04:05:37 PM
4SPEED427 said
April 8th
One word, COOL! Looking forward to updates on it.
cdnpont said
April 8th
That's going to be something wicked.
To me, they look great sitting up high.
DonSSDD said
April 8th
You have great taste in cars, will it be pale blue?
killer car,,,just by looking at your shop your doing all the right things!!!
Str8six said
April 9th
Thanks for the replies. Car is going to be white with painted lettering on rear quarters, doors and fenders.
pontiax said
April 9th
I like it! But im bias to B body cars. One thing different i would have done with mine is powder coated the bumpers aluminium. you have a great start.. ps. my two daughters are in their 20s but have helped in many ways with my car, my son the oldest helped with the wiring. Having the family involved certainly keeps the momentum going.
Couldnt find a white one on line. I like the look.
73SC said
April 9th
Gotta ask, I may have missed it, what are you thinking about powering this Rock Machine?
Bob F said
April 9th
409 with dual quads?
Str8six said
April 9th
Have not seen another white one thru any search either. We picked up a 383 Stroker long block to which we will be replacing all of the top end, new roller cam, lifters, rockers and aluminum heads. Hoping to get close to 500hp.
As far as I know, Canadian dealerships did not join the US when it came to factory lightweight drag car sponsorships. My Dad & I have started a "What if" Canadian version with this '63 Parisienne. Dad bought the car originally in 1986, we drove it for a couple years until it was sold. Several years later I purchased it back. My girlfriend (now wife) & I drove the car until we started a family(3 daughters) who are all now in their 20's. After many years and two other Canadian Pontiac builds later it was time to bring this '63 back out but with a different spin. It is the first car we've built where the goal wasn't to get it as low as possible. Full Global West tubular rear suspension with the added upper control arm. For now running an era correct "P" case posi rear but plans for a 9" when budget allows. Ball joint and coil spring spacers out front should give us a nose up stance. Picked up a 383 Stroker long block from a good friend to which we will be replacing most of the top end. Would like to hit close to 500hp with it . We have an aluminum glide however the car will likely see the street more than the track so it is possible we will end up stuffing a built 700R4 in. Dads garage was nicknamed Four Corners Garage years ago so that will be prominent on the rear quarters. Large PONTIAC lettering along with logo will be painted on the doors. Local dealership Howard & White Motors will also be painted on doors. Lucky enough to have found an NOS Super Duty scoop which will be on the hood. Having a great time working on this with my Dad 38 years from the first time it entered our family.
-- Edited by Str8six on Tuesday 9th of April 2024 04:05:37 PM
That's going to be something wicked.
To me, they look great sitting up high.
You have great taste in cars, will it be pale blue?
This is mine.
killer car,,,just by looking at your shop your doing all the right things!!!
I like it! But im bias to B body cars. One thing different i would have done with mine is powder coated the bumpers aluminium. you have a great start.. ps. my two daughters are in their 20s but have helped in many ways with my car, my son the oldest helped with the wiring. Having the family involved certainly keeps the momentum going.
Gotta ask, I may have missed it, what are you thinking about powering this Rock Machine?