Members Login
Username 
 
Password 
    Remember Me  
Post Info TOPIC: 61 Parisienne Conv.


Member

Status: Offline
Posts: 7
Date:
61 Parisienne Conv.


I am a newby and am looking for the following parts;
Heater afn
Idler arm
Pitman arm
Inner tie rods
Outer tie rods
Dust cap
Gas filler hose
Thanks;
Stan 519-232-4700

__________________
Stan Hansford


A Poncho Legend!

Status: Offline
Posts: 48751
Date:

I am thinking that those items (except maybe the gas filler hose) should be available at a parts store such as NAPA.

If you have no luck with that let me know. I am a GM parts manager and we also deal in jobber parts. I can get you part numbers if nobody out there can help you.

__________________

1966 Strato Chief 2 door, 427 4 speed, 45,000 original miles 

1966 Grande Parisienne, 396 1 of 23 factory air cars



Guru

Status: Offline
Posts: 628
Date:

Ball joints,tie rod ends,control arm bushings,idler arm and all the power assist parts are available. If you need a pitman arm for power steering car use one for a 68-82 vette.They are available aftermarket. Standard steering arms are not available as they have a ball stud on them. There are places that offer a rebuild service but I have no info on their success rate.Gas filler hose is actually a pipe with a 3 inch hose coupling. hose section ia available from a Chevy aftermarket guy.Any early 60's blowerr motor will work ( mine is from a 64 Pontiac).

Do you have a line on any 61 fenders.

Bill.

-- Edited by a421cat at 09:27, 2008-06-23

__________________
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.

Tweet this page Post to Digg Post to Del.icio.us
.
Support Canadian Poncho!
Select Amount:
<
.
.
.