Members Login
Username 
 
Password 
    Remember Me  
Canadian Poncho Homepage -> Canadian Poncho -> 65-70 Full Size Chassis Tech Forum -> frame blueprints
Post Info TOPIC: frame blueprints
jeff


Member

Status: Offline
Posts: 12
Date:
frame blueprints
Permalink  

Anybody out there have a frame blueprint for a 66 beaumont convertable.....thanks

__________________
4SPEED427


A Poncho Legend!

Status: Online
Posts: 48776
Date:
Permalink  

Do you mean dimensions if you are measuring after a crash?

__________________

1966 Strato Chief 2 door, 427 4 speed, 45,000 original miles 

1966 Grande Parisienne, 396 1 of 23 factory air cars
jeff


Member

Status: Offline
Posts: 12
Date:
Permalink  

just starting from ground up and want to double check everything while the frame is naked......width demensions .....to make sure it wasnt cracked up in the past

-- Edited by jeff on Wednesday 14th of October 2009 02:33:36 PM

__________________
Ghost Post


Poncho Master!

Status: Offline
Posts: 1628
Date:
Permalink  


67 Chevelle frame dimensions.jpg


Here's a page w/ 67 dimensions which should be the same..

smile.gif

Click here...
http://www.chevellestuff.com/tech/67_frame_dimensions.htm



__________________

 

 

I like real cars best...especially the REAL real ones!
----------------------------------------------------------------
4SPEED427


A Poncho Legend!

Status: Online
Posts: 48776
Date:
Permalink  

That's from the service manual?

I was going to look that up in the manual tonight and post it.

Seems to me I had seen a picture that gave diagonal measurements to make sure it hadn't been "tweaked" but I could be wrong.

__________________

1966 Strato Chief 2 door, 427 4 speed, 45,000 original miles 

1966 Grande Parisienne, 396 1 of 23 factory air cars
norontcan


Canadian Poncho Superstar!

Status: Offline
Posts: 6948
Date:
Permalink  

yes 66 dimensions are the same as 67

__________________
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.
Canadian Poncho Homepage -> Canadian Poncho -> 65-70 Full Size Chassis Tech Forum -> frame blueprints
Tweet this page Post to Digg Post to Del.icio.us
.
Support Canadian Poncho!
Select Amount:
<
.
.
.