2024 Canadian Poncho Calendars are Now Available! CLICK HERE

 

 

Members Login
Username 
 
Password 
    Remember Me  
Post Info TOPIC: torque convertor washers


Guru

Status: Offline
Posts: 546
Date:
torque convertor washers


Hey all kinda did a mess up on the convertor,when i took it apart i didn't notice that there are two thrust washers that are similar except one has splines inside it,Now i can't remember if it was the front one or the back that has the splines.My breakdown shows them as the same.Opps.

__________________


Guru

Status: Offline
Posts: 766
Date:

Can you post picture of it please, I'll try to help.

Fitz.

__________________

www.FitzbackGarage.com Look for Easy Steering in your vintage Poncho, Look for the EasyDrive Power Steering System in the web site



Guru

Status: Offline
Posts: 546
Date:

Ok here's a couple pics.As you can see only one has splines on the inside but both in my breakdown are listed as the same number.Thats what you get for being in a hurry and shuffling parts around before you map where they go.I know they go on each side of the stator.

Attachments
__________________


Guru

Status: Offline
Posts: 766
Date:

In my litterature, it must be 2 same trust plate, without spline.

It may be an upgrade on yours. I would use the splined one near the cover, and the not splined one face to pump.

Fitz.

__________________

www.FitzbackGarage.com Look for Easy Steering in your vintage Poncho, Look for the EasyDrive Power Steering System in the web site



Guru

Status: Offline
Posts: 546
Date:

Got them figured out.I ended up maeasuring the old wear marks and matching them up to the thrust surfaces.Thankfully they are 2 different sizes so figured out what side was running where.

__________________
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.

Tweet this page Post to Digg Post to Del.icio.us
.
Support Canadian Poncho!
Select Amount:
<
.
.
.