I seem to have lost one of the brass fittings that goes from inner fender to oouter for breaks. Im unsure of what it is called so i can ask suppliers if they have one !
I don't know what you call it but Canadian Tire and parts Source have a good supply of brass fittings like this. I have had good success at going there with the one in hand and finding what was needed. My last venture with this was to make up a fitting for an oil pressure sending unit conversion from light to guage. They had what I needed.
it is called a "through bulkhead" fitting.Should have a horseshoe shaped spring clip or a thin nut to hold it in place. at least that is what I think it is.
Yes it did confirm what i thought thanks the valve assembly looks the same as mine.. the front brakes come from the front brake outlets, now i just have to figure out if i should run 2 seperate lines for the front or go to the brass fitting on the drivers side and then to the pass side as per original, blocking off the outlet to the back from pass side.
-- Edited by Lefty on Friday 16th of July 2010 10:59:12 AM
__________________
Surrey BC
1963 Acadian Beaumont Sport Deluxe http://www.63acadian.com/
