2024 Canadian Poncho Calendars are Now Available! CLICK HERE

 

 

Members Login
Username 
 
Password 
    Remember Me  
Post Info TOPIC: found the miss fire in 52


Canadian Poncho Superstar!

Status: Offline
Posts: 5681
Date:
found the miss fire in 52


After pulling what little hair I have left out, I found the problem,actually 2 things!!!  Checked out the fuel, came back as 8% ethanol,no water in it, fuel pump flow & pressure was good. So into the distributor, HEI cap was good [new] & then I looked at the rotor [new too] the metal strip had "cracked" 1/2 way from centre button to point, arcing & moving sideways hitting on wrong cyl. easy fix, then i checked the Vac. adv. diaphram. NOT WORKING, wouldn't pull with vac. so no vac adv. i was able to find another vac dash pot & installed it. Took car for test run with centre section of grille removed for more air flow & it ran at 160F to 170 down the road!!  Installed the grille & another test ran at 165 [still good] pulled over & idled till it hit 190 then out on the road, came back to 165. It wouldn't do that before, whatever it went to it stayed there!!!! Runs "REALLY" strong!!  I never thought to check the vac. adv. as the dist. came out of a running engine, & NAPA made good on the rotor & upgraded it to a better one, as only had 1200 mi on it!!! Tested the dash guage with "infared gun" on Int. manifold by sender unit & guage reads 5 deg. high [ not bad for Sun-Pro guage made in China] suspect the 1st. rotor may have come from there too!!!! Happy Camper now that I found it, gas mi. seems better too!!!   Pete



__________________

Some times I wake up GRUMPY, but today I let her sleep in    !!!!!!!! BLACKSTOCK Ont.



Guru

Status: Offline
Posts: 962
Date:

Always feels good to figure out the issues!! Glad to hear its running better for ya!!

__________________

John

1972 Pontiac Lemans (daughter's car) 
2005 Pontiac Grand Am
2004 Ford Explorer Sport Trac



A Poncho Legend!

Status: Offline
Posts: 20744
Date:

dualquadpete wrote:

Tested the dash guage with "infared gun" on Int. manifold by sender unit & guage reads 5 deg. high [ not bad for Sun-Pro guage made in China] suspect the 1st. rotor may have come from there too!!!!


 biggrin

Glad all is well Pete.



__________________

Prince Edward Island

'64 Parisienne CS "barn find" - last on the road in '86 ... Owner Protection Plan booklet, original paint, original near-mint aqua interior, original aqua GM floor mats, original 283, factory posi, and original rust.



Poncho Master!

Status: Offline
Posts: 1833
Date:

The infrared gun will read the surface temperature of the manifold - and it is likely a couple degrees cooler than the internal temperature, so your gauge is probably closer than you think.

GM HEI distributors can be bad for both vacuum advance & mechanical advance mechanisms sticking. I've seen several distributors where the mech advance was completely locked up.

Like unclebernie said - "feels good to figure out these issues". Frustrating during the actual figuring stage, but rewarding when you get it resolved.

Have fun!


__________________

_______________________________________
==|====|----B-E-A-U-M-O-N-T----|====|==

\__________________|________|____________________/

__\____O__________________|66BEAU|___________________O____/



Canadian Poncho Superstar!

Status: Offline
Posts: 6944
Date:

Always feel good when one is able to reason through the problem and over come it. Just have to keep an open mind and check everything possible. And as you've found out it isn't always just 1 thing.
Persistance usually pays off.

__________________


Poncho Master!

Status: Offline
Posts: 2190
Date:

Pete: So your rad investment was a good thing. Glad to see that you are a little cooler now...
Cliff

__________________

Cliff

Done Hurryin

Like the larger type for my eyes. 

 

 



Canadian Poncho Superstar!

Status: Offline
Posts: 5681
Date:

Yep, ran cool last night to cruise in in Port Perry, 150 cars turned out. I could have 'sworn' it was the rad, but the guy was right, on saying it would COOL it, & it was mechanical. Sure didn't want to have to do another radiator,after having this one "BUILT" The Ol Torpedo back is "SCARY FAST" & hooks up pretty good. OH Cops drove thru the lot behind where we were parked last night, punching in all the lic. plate# that were backed up to the fence???? Mine included??? still trying to figure out WHY??? Pete

__________________

Some times I wake up GRUMPY, but today I let her sleep in    !!!!!!!! BLACKSTOCK Ont.



Addicted!

Status: Offline
Posts: 387
Date:

Great to hear Pete, and glad, despite the hair loss, that it turned out
to be kinda simple/cheap to fix.

Hmm, ALL the liscence plates eh..
Ah, it's the start of a new Port Perry Rod Registry !
And you got in on the first edition !



__________________

Glen.

Vernon B.C. CANADA !

1969 SD 396

Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.

Tweet this page Post to Digg Post to Del.icio.us
.
Support Canadian Poncho!
Select Amount:
<
.
.
.