Photobucket
Members Login
Post Info TOPIC: Needed: 66 Canso 1/4 emblem placement/measurement


Uber Guru

Status: Online
Posts: 3702
Date:
Needed: 66 Canso 1/4 emblem placement/measurement


Anyone have the measurement for the 1/4 Canso script? Found a template but it seems to be wrongconfuse and alot different placement than on my 4dr, so I don't know which is right. Took a couple of pics of the measurements I need. From the tail of the "O" to back of 1/4 and from center of body line to bottom of "O" Thanks Jim

DSC06127.JPG DSC06129.JPG

 



Attachments
__________________


Poncho Master!

Status: Offline
Posts: 1899
Date:

Hi Jim, measurements on my car are 3 1/8" from the "O" to the edge of the body panel and the tail of the script lines up just under the lower edge of the tail light housings and 3 3/4" from the bottom of the "O" to the top edge of the belt line. Both quarters were replaced on my car but we took a pattern from the originals. I hope this is of help to you.
Chris



-- Edited by ARCADIAN on Sunday 8th of November 2015 07:38:43 PM

__________________


Uber Guru

Status: Online
Posts: 3702
Date:

Thanks for taking the time Chris, appreciate it! Now I can drill more holes!smile



__________________


Poncho Master!

Status: Offline
Posts: 1899
Date:

Glad I could help.

__________________
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.

Tweet this page Post to Digg Post to Del.icio.us
.
.
.
.