Couple of pieces I'd like to find and one I need to find. Not sure if they are reproed or not but my oil pressure connector for the idiot light is starting to leak some oil. Had a couple but only one likes to read oil pressure. Also looking for the little shield that surrounds a pair of spark plugs and also another valve cover spark plug wire support. Thanks.
Sorry the plug shields are all the same. I thought you were referring to the spark plug wire holder.
Ah, ok, you can tell I'm not a Beaumont guy! I don't have any of those then, mine are all the style with opposing images.
For some reason I was thinking you needed the pressure sender connector. I'm pretty sure the sending unit can still be bought at your dealer as well under 3815936. I've sold many of those over the years but maybe by now they are obsolete. I don't remember what they cost though.
__________________
1966 Strato Chief 2 door, 427 4 speed, 45,000 original miles
1966 Grande Parisienne, 396 1 of 23 factory air cars
I have some wire looms ... I will check if you still need one. I'll take some pictures of what I have.
I bought a repro oil sender and repro shields.
Do you need anything else Jerel?
__________________
Prince Edward Island
'64 Parisienne CS "barn find" - last on the road in '86 ... Owner Protection Plan booklet, original paint, original near-mint aqua interior, original aqua GM floor mats, original 283, factory posi, and original rust.
I will look to see if i have anything. that stuff is almost impossible to find. althought i think the heat shield set is being reproduced, but i am not sure if it is 100% correct for a 64
Just for the record, these looms and shields are specific to 1964 and 1965 chevelles and beaumonts only. no other GM car used the same ones. possibly 1966 as well, but by 1967 they were all different
__________________
Beaumontguru
MY BEAUMONT HAS 4 STUDDED TIRES AND 2 BLOCKHEATERS......AND LOTS OF OIL UNDERNEATH. The other one has a longer roof.
I will look to see if i have anything. that stuff is almost impossible to find. althought i think the heat shield set is being reproduced, but i am not sure if it is 100% correct for a 64
Just for the record, these looms and shields are specific to 1964 and 1965 chevelles and beaumonts only. no other GM car used the same ones. possibly 1966 as well, but by 1967 they were all different
Interesting and thanks for that Dave. So I may be somewhat different already then as this engine is out of a 66 Beaumont. Mainly trying to have it look uniform and functional. Not entering any shows for judging. And if you see this car on a trailer it's probably been stolen.
I have some wire looms ... I will check if you still need one. I'll take some pictures of what I have.
I bought a repro oil sender and repro shields.
Do you need anything else Jerel?
I think this is the list for now. I got a loom yesterday from a friend which is probably era correct but I had to mount it in an a different position so looks a little hokey but will keep the wires clear for now. Thanks Darryl.
Well, Canadian Poncho comes through again and in very short time. Couple guys from the coast I have to thank. Brian C. (Brian)was on a mission when he saw what I was missing and the pieces he didn't have, he sourced out today from another member Don(rkycoast) Good on both of them but an extra thanks to Brian who keeps me educated in all these little things I am not familiar with and also for his drive to hunt down the other parts. And when I talk to him it isn't because he doesn't have anything else to do but he makes time from his busy schedule to keep another one of these Beaumonts performing on the road. Both great guys and I want to acknowledge them.