hey guys im wondering which wire goes where ive been using the google looking for the spark plug wire to spark plug order i can't figure out where they all go? if some one knows a good site or if you have a 305 a little description would be nice =)
-- Edited by jonathanD on Friday 20th of May 2011 05:57:23 PM
67SD396 said
May 20, 2011
Will this help?
dualquadpete said
May 20, 2011
Jonathon, if you pulled the dist. out of engine or it wasn't in,you have to get # 1 cyl. up on TDC [top dead centre] of firing stroke, then line up the rotor to where #1 is on cap. you will have to allow for gear engagement which means you have to go a little past on the rotor to allow for the movement as it engages in "cam" drive!!!
jonathanD said
May 20, 2011
i have not touched the dist at all i did not want to mess anything up =)
427carl said
May 20, 2011
Why are the wires off???
jonathanD said
May 20, 2011
they where never on half the sparkplugs where broken =) so i got the new plugs just need to get the firing order/ wire loaction
67curves said
May 20, 2011
67SD396 wrote:
Will this help? 18436572
dualquadpete said
May 21, 2011
OK , you will still have to get the engine "up" on # 1 TDC & see where the "rotor is pointing inside the cap[ both valves closed on # 1 & piston on TDC] Then wire it 1 8 4 3 6 5 7 2 making sure you go in the rotation that the dist. turns. If you can spin the engine on the starter,pull # 1 s/plug & put your thumb over the s/plug hole till you start to feel compression,then turn by hand till piston is at top, timing mark on balancer will line up with TDC on tab. Other way is to pull the rocker cover, & rotate the engine till int. valve closes,then rotate engine till piston comes up to TDC on tab, then follow the firing order & rotation of dist.
hey guys im wondering which wire goes where ive been using the google looking for the spark plug wire to spark plug order i can't figure out where they all go? if some one knows a good site or if you have a 305 a little description would be nice =)
-- Edited by jonathanD on Friday 20th of May 2011 05:57:23 PM
Will this help?
i have not touched the dist at all i did not want to mess anything up =)
Why are the wires off???
they where never on half the sparkplugs where broken =) so i got the new plugs just need to get the firing order/ wire loaction