Will hood hinges off a 1967 Beaumont fit on a 1967 GTO?
rabbit64cs said
Aug 7, 2014
I'll look later, I have both examples here...
Something tells me no.
dcneric said
Aug 7, 2014
According to AMES's catalog, all A-body 64-67 use the same hood hinge.
rabbit64cs said
Aug 7, 2014
Here are some snaps from opgi web site, different part numbers, see the relief Is different for the hood, ill still go look outside, but recall running into this before...
Definitely know that 64 and 65 Chevelle/Beaumont will not interchange.
dcneric said
Aug 7, 2014
I was doing a bit of on line sleuthing and it appears that the Beaumont/Chevelle hinge does not interchange with the GTO/LeMans.
rabbit64cs said
Aug 9, 2014
i looked at my 67 gto and compared them to a pair of 67 beaumont hinges I have....
not interchangeable, just like the pics I posted below, fit different to the hood.
marshalldude said
Aug 9, 2014
send your's to Willie better than new redoes them perfectly
http://www.hoodhingerepair.com/
jmont64 said
Aug 9, 2014
marshalldude wrote:
send your's to Willie better than new redoes them perfectly
http://www.hoodhingerepair.com/
What roughly does he charge? I have been told by more than one person including a supplier that the repro ones are junk.
since 1983 said
Aug 20, 2014
yup , i had to straighten out mine in a vice to get a better Hood / fender ajustemnt
i still have my orig hinges wich i will not throw away , i might sand blast them and peut them back on the car
marshalldude said
Aug 21, 2014
We have your hood hinges ready, powder coated and ready to ship out via UPS tomorrow. I just sent you a PayPal invoice for 327.00, the breakdown is as following, 50.00 for the core set of hinges, 150.00 to rebuild that core, 35.00 for the new Gm 29 coil count SS hood springs, 75.00 to powder coat them all in Chassis black, and 17.00 UPS ground charges.
this is the cost he supplied the hinges fit fantastic
CdnGMfan said
Aug 22, 2014
After hearing about the repros it makes me glad that I bought a NOS set from Herron Chevrolet-Oldsmobile back in 1986 for my 67 Chevelle along with hood springs. They came in a sealed plastic bag from a GM parts warehouse in Woodstock Ontario.
The springs were stiffer if the car had a "big block" hood. I went for the standard springs and my hood raises with one finger.
Will hood hinges off a 1967 Beaumont fit on a 1967 GTO?
Something tells me no.
Here are some snaps from opgi web site, different part numbers, see the relief Is different for the hood, ill still go look outside, but recall running into this before...
i looked at my 67 gto and compared them to a pair of 67 beaumont hinges I have....
not interchangeable, just like the pics I posted below, fit different to the hood.
send your's to Willie better than new redoes them perfectly
http://www.hoodhingerepair.com/
What roughly does he charge? I have been told by more than one person including a supplier that the repro ones are junk.
i still have my orig hinges wich i will not throw away , i might sand blast them and peut them back on the car
We have your hood hinges ready, powder coated and ready to ship out via UPS tomorrow. I just sent you a PayPal invoice for 327.00, the breakdown is as following, 50.00 for the core set of hinges, 150.00 to rebuild that core, 35.00 for the new Gm 29 coil count SS hood springs, 75.00 to powder coat them all in Chassis black, and 17.00 UPS ground charges.
this is the cost he supplied the hinges fit fantastic
After hearing about the repros it makes me glad that I bought a NOS set from Herron Chevrolet-Oldsmobile back in 1986 for my 67 Chevelle along with hood springs. They came in a sealed plastic bag from a GM parts warehouse in Woodstock Ontario.
The springs were stiffer if the car had a "big block" hood. I went for the standard springs and my hood raises with one finger.