i would try and drill and re-tap them
very carefully
65post said
Oct 29, 2015
Are they for the rear trim panel of a 68 ?
hawkeye5766 said
Oct 29, 2015
If not enough lenght for a trim clip nut and you can access the rear of the panel, you can go to your local jobber with emblem and match up with self locking retainer ring. not stock but will hold it on. They're a bugger to get off once on!
marshalldude said
Oct 29, 2015
got them from bill's birds he said were for 67 but don't line up with the holes on my 67 don't want to drill new holes I agree they are for 68 do you think it's possible to rechrome origionals mine are pitted but all posts are good
-- Edited by pudge444 on Thursday 29th of October 2015 10:53:46 PM
marshalldude said
Oct 30, 2015
thanks for reply the ones on the black background are pitted like mine the other guy can't send pictures so I am stumped will talk to some rechromers maybe can be redone or bodyshop maybe 2way tape the ones with no pegs I don't think they are 67's holes don't line up and are little smaller
anyone ever attach these the seller says pop rivits
very carefully
Are they for the rear trim panel of a 68 ?
If not enough lenght for a trim clip nut and you can access the rear of the panel, you can go to your local jobber with emblem and match up with self locking retainer ring. not stock but will hold it on. They're a bugger to get off once on!
got them from bill's birds he said were for 67 but don't line up with the holes on my 67 don't want to drill new holes I agree they are for 68 do you think it's possible to rechrome origionals mine are pitted but all posts are good
I would wait and find the right ones.
It doesn't say what year, looks like 67,
http://www.kijiji.ca/v-auto-body-parts/london/beaumont-original-trunk-letters/374580678?enableSearchNavigationFlag=true
this guy could have something too,
http://www.kijiji.ca/v-other-auto-parts-and-accessories/barrie/64-69-beaumont-and-chevelle-interior-parts/350984526?enableSearchNavigationFlag=true
-- Edited by pudge444 on Thursday 29th of October 2015 10:53:46 PM
thanks for reply the ones on the black background are pitted like mine the other guy can't send pictures so I am stumped will talk to some rechromers maybe can be redone or bodyshop maybe 2way tape the ones with no pegs I don't think they are 67's holes don't line up and are little smaller
these were on ebay http://www.ebay.ca/itm/311448338132?_trksid=p2060353.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT
-- Edited by marshalldude on Friday 30th of October 2015 10:59:29 AM
-- Edited by marshalldude on Friday 30th of October 2015 11:03:30 AM
I'd attach them with Cold Weld epoxy instead of 2-sided tape.
Sikaflex
what about the little bumps won't that interfere with the bonding that's why I was thinking 2way tape ?