Has anyone had any experience installing the floor pan full length 1/2 sections. Goodmark or AMD
Did they actually butt up and/or overlap down the center of the trans-driveshaft tunnel?
do either of those brands differ in any dimensions?
4SPEED427 said
Mar 11, 2019
Dave, check with Gary, Fake68. I think he did those on his 67.
65 SD L79 said
Mar 11, 2019
beaumontguru wrote:
Has anyone had any experience installing the floor pan full length 1/2 sections. Goodmark or AMD
Did they actually butt up and/or overlap down the center of the trans-driveshaft tunnel?
do either of those brands differ in any dimensions?
did the one 65 many years back. braces were good and its a lot easier to split the inner outer rockers to slide the pan in. 2 sides did not meet well in the middle . One piece pan is the only way to go in my eyes
beaumontguru said
Mar 11, 2019
Ya i will have to talk to gary. When you read up on them, some guys get the gap to line up and some guys dont. Could be just a problem with the installer.
In my case dont want one piece, all braces and inner rockers are good, just the sheetmetal pans that are bad, but i mean bad!
Has anyone had any experience installing the floor pan full length 1/2 sections. Goodmark or AMD
Did they actually butt up and/or overlap down the center of the trans-driveshaft tunnel?
do either of those brands differ in any dimensions?
did the one 65 many years back. braces were good and its a lot easier to split the inner outer rockers to slide the pan in. 2 sides did not meet well in the middle . One piece pan is the only way to go in my eyes
Ya i will have to talk to gary. When you read up on them, some guys get the gap to line up and some guys dont. Could be just a problem with the installer.
In my case dont want one piece, all braces and inner rockers are good, just the sheetmetal pans that are bad, but i mean bad!