Enjoy 5% OFF at VEVOR Canada! and Support Canadian Poncho at the Same Time!
Members Login
Username 
 
Password 
    Remember Me  
Post Info TOPIC: 65-66 B-BODY 12 bolt rear end.


A Poncho Legend!

Status: Offline
Posts: 35601
Date:
65-66 B-BODY 12 bolt rear end.


I have a 66 B-body with 2.73 open rear.. I have a 66 Chevelle Posi w/3.08 gears..2 Years gone by, and no posi.. Anyone have a complete rear end to bolt in? I can change it , but not the gears... Any one know someone, who could change gears in car for me?  cry  (nothing getting done CARL)

__________________

 



Poncho Master!

Status: Offline
Posts: 1981
Date:

The only person I trust to do rearends is in Chatham. Canada Gear / Bowtie Muscle. His name is Brad and the phone number is 519 354 5016. He is a Moser dealer and will do rearends, transmissions, etc. You can take him the whole car or just the rearend. I called him the other day about a clutch fork but he has nothing either. I know he will be at the swap meet on Sunday.
 Is the 66 Chevelle rearend a 12 bolt?

__________________
Fall into savings UP TO C $50 OFF Shop now
Fall into savings UP TO C $50 OFF Shop now


Poncho Master!

Status: Offline
Posts: 1357
Date:

If you want to sell the 66 Chevelle diff whether it is a 10 or 12 bolt I am interested.  Thanks Al

__________________


A Poncho Legend!

Status: Offline
Posts: 35601
Date:

The posi is from 66 396 chevelle, and included the 3.08 rimg and pinion  I bought it on e-bay 2 years ago   12 bolt but no housing

__________________

 



A Poncho Legend!

Status: Offline
Posts: 49917
Date:

I need help getting this straight. You have a 66 Chevelle 12 bolt diff. It's complete, or missing the center section?

It is the one with the 3.08 gears?

__________________

1966 Strato Chief 2 door, 427 4 speed, 45,000 original miles 

1966 Grande Parisienne, 396 1 of 23 factory air cars (now converted to a "factory" 4 speed)



A Poncho Legend!

Status: Offline
Posts: 35601
Date:

If I can find a rear, all set up, or another posi and gears,  I will sell 12 bolt posi I have.  Does the chevelle posi, have any numbers on it that ,would be more important, to a chevele/beaumont owner?   Carlsmile

__________________

 



A Poncho Legend!

Status: Offline
Posts: 35601
Date:

I bought the complete posi and he sent me the gears with it  The housing wouldnt fit in the box..  so everyting but the rear housing which I didnt need..I can post a picture

__________________

 

Fall into savings UP TO C $50 OFF Shop now
Fall into savings UP TO C $50 OFF Shop now


A Poncho Legend!

Status: Offline
Posts: 49917
Date:

Carl

Can you PM me your phone number? Maybe I can call you and help you through this. I am at work, but should be able to make time


__________________

1966 Strato Chief 2 door, 427 4 speed, 45,000 original miles 

1966 Grande Parisienne, 396 1 of 23 factory air cars (now converted to a "factory" 4 speed)



A Poncho Legend!

Status: Offline
Posts: 35601
Date:

I will PM you my number...remember there is NO RUSH to this, as the posi has been here for 2 years.. I can do this long, after I get the 4 speed in. Taylor 55 is interested in chevelle posi because of its narrowness. I only need something to spin both wheels.. changing whole rear end is within my mechanical abilities..Did you see the origonal fork for my body style on e-bay  Its climbing like a space shuttle.  lol    I am going to garage to photo my posi stuff.. Carl2

Attachments
__________________

 



Poncho Master!

Status: Offline
Posts: 1357
Date:

Carl, you have the posi carrier, 3:08 gears, Chevelle axles, but no housing. That carrier should fit with the 3:08 gears into your 65-66 12 bolt housing  providing this was used as a combination by the previous owner. Use your original axles as the chevelle axles will be too short.There are different 12 bolt posi carriers for different series of gears. I think it is 3:73 4:10 4:56 is one series and the other is 3:42 3:07 2:73 . I am sure someone will correct this if i am wrong. The thickness of the crown gear makes the difference with the carriers. If you do not use the axles from the Chevelle I am interested in those.  Thanks Al

__________________


A Poncho Legend!

Status: Offline
Posts: 49917
Date:

The parts book says 2.29, 2.56 and 2.73 is one carrier.

3.07, 3.31, 3.55, 3.73 is another carrier.

4.10, 4.56, 4.88 is another carrier.

So basically, it appears the first digit of the ratio determines which carrier. And with that said, as always, if I'm wrong, feel free to correct me!

__________________

1966 Strato Chief 2 door, 427 4 speed, 45,000 original miles 

1966 Grande Parisienne, 396 1 of 23 factory air cars (now converted to a "factory" 4 speed)



Poncho Master!

Status: Offline
Posts: 1357
Date:

Does the parts book give any code numbers as to ID the carrier?  So as long  Carl purchased a matching carrier and gears  it fits into his 65--66 12 bolt housing. Richmond also sells gears 4:10 and up to fit the 3 series carrier without using the spacer. The crown gear is made wider.So Carl it is up to you to ID which carrier you have and decide which gears you want to use. If it is a 3 series and you want to run 4:10   I have a good used set of Richmond gears. If you have the Chevelle axles I am interested in them.   Al

__________________
Fall into savings UP TO C $50 OFF Shop now
Fall into savings UP TO C $50 OFF Shop now


A Poncho Legend!

Status: Offline
Posts: 49917
Date:

I think I have the numbers for that at home. I may know of a site that lists it, I will check.

__________________

1966 Strato Chief 2 door, 427 4 speed, 45,000 original miles 

1966 Grande Parisienne, 396 1 of 23 factory air cars (now converted to a "factory" 4 speed)



A Poncho Legend!

Status: Offline
Posts: 49917
Date:

Yup, save this page:

http://novaresource.org/axle.htm

__________________

1966 Strato Chief 2 door, 427 4 speed, 45,000 original miles 

1966 Grande Parisienne, 396 1 of 23 factory air cars (now converted to a "factory" 4 speed)



Poncho Master!

Status: Offline
Posts: 1357
Date:

I saved the page Thanks Carl.

__________________


A Poncho Legend!

Status: Offline
Posts: 35601
Date:

yes!  that  a great reference page...needs to go in the Library..I have a friend who fixes Chevelles, and Beaumonts! I will ask him about a housing and axles for TAYLOR 55   biggrin



__________________

 



Uber Guru

Status: Offline
Posts: 3463
Date:

carl2,
are you going with more than a 3.08 gear...

__________________

 






Fall into savings UP TO C $50 OFF Shop now
Fall into savings UP TO C $50 OFF Shop now


A Poncho Legend!

Status: Offline
Posts: 35601
Date:

69 belair wrote:

carl2,
are you going with more than a 3.08 gear...



        Yes I hope to!   Since the car never goes anywhere, I can run right up to 5:13  biggrin    Actually you suggested about 3.55 I think.confused


-- Edited by 427carl at 18:57, 2008-03-08

__________________

 



Uber Guru

Status: Offline
Posts: 3463
Date:

i went with 3.73s, but would go with 3.55s if i could do it again.

__________________

 








A Poncho Legend!

Status: Offline
Posts: 35601
Date:

Let me know if you find any 3.55..  you could locate them for me ,or use them for you, and I would take your 3.73  idea  I run a P235/75R-15 tire 

__________________

 



Uber Guru

Status: Offline
Posts: 3463
Date:

ebay

__________________

 








Uber Guru

Status: Offline
Posts: 3463
Date:

i'm running a 275/60R15 rear tire, 28.5" tall.

__________________

 






Fall into savings UP TO C $50 OFF Shop now
Fall into savings UP TO C $50 OFF Shop now


A Poncho Legend!

Status: Offline
Posts: 35601
Date:

ok e-bay    wish I could run that tire  I dont have the fenders for it, even on a 7 inch rim

__________________

 



Uber Guru

Status: Offline
Posts: 3463
Date:

really??? i have an 8" rally wheel on the rear of mine, no clearance issues.

__________________

 








Canadian Poncho Superstar!

Status: Offline
Posts: 4525
Date:

I ran 225 70 15s on 8" Corvette wheels on my 65 Parisienne Convt and never had a clearance issue. One thing I did notice however was that sometimes one wheel would be a little closer to the fender lip than the other. At the time I put it down to the panhard bar being a little off centre depending on the load in the car, or possibly a weak spring on one side, but I'm not sure what was the issue. On my 69 Parisienne I run the 225 70 15 tire on 8.5 inch American Racing Torque Thrust wheels with no issues, and I run that same tire on 8" Corvette wheels on my 68 Caprice, also with no issues.

__________________

62 Catalina 2 dr post project

55 Bel Air 2 dr post 265PP/PG

68 Bel Air 2 dr post BB project

 

1 2  >  Last»  | Page of 2  sorted by
Quick Reply

Please log in to post quick replies.

Tweet this page Post to Digg Post to Del.icio.us
.
Support Canadian Poncho!
Select Amount:
<
.
.
.