Im trying to keep my 283 somewhat stock and have run into a little trouble.The only things im changing are cam and manifold.I have a Weiand 4 barrel manifold i wanted to use but the pcv filter under the stock manifold is in the way.This weiand is somewhat era correct as it has the provision for the oil filler neck so i really wanted to use it if any.I've already restored my valve covers so changing them is out(to provide an alternate pcv)Want to keep the stock look anyways.Im thinking that filter under the manifold is needed so complete removal is out?Any ideas?As always thanks in advance.
Thanks for replying Carl.I was thinking for a mod to take a sawzall and cut the top flat and tack a tin plate on so it would be flat on the top?Not sure if this would give enough clearance but i have several of those baffles to play with.I already destroyed one smashing it flat with a sledge....lol.nope that didnt work.
When you say the PCV filter under the stock manifold, are you referring to the horizontal cylinder looking thing back by the distributor that connects to the road draft tube?
Sorry I can't help with this problem, but while you guys are in the help mode- do any of you know where I could find '67 beaumont sd floor mats (front & rear) with the word beaumont on them and also has the pontiac / spear emblem ?
Sorry I can't help with this problem, but while you guys are in the help mode- do any of you know where I could find '67 beaumont sd floor mats (front & rear) with the word beaumont on them and also has the pontiac / spear emblem ?
Click on your name, on the left side click avatar, then click browse to pull up your pictures and choose the one you want, click upload an image, when the picture you want appear, click it to put a blue square around it, then click select an avatar and bingo!
The other Carl.......
__________________
1966 Strato Chief 2 door, 427 4 speed, 45,000 original miles
1966 Grande Parisienne, 396 1 of 23 factory air cars