Enjoy 5% OFF at VEVOR Canada! and Support Canadian Poncho at the Same Time!
Members Login
Username 
 
Password 
    Remember Me  
Canadian Poncho Homepage -> Canadian Poncho -> General Engine Performance Forum -> Small block Chevy Breathing
Post Info TOPIC: Small block Chevy Breathing
427carl


A Poncho Legend!

Status: Offline
Posts: 35601
Date:
Small block Chevy Breathing
Permalink  

Do 283,327 engines breath differently than 350's ?   A lot of 283,327's had that breather tube at back, and oil tube at front of intake                                                I was a cruise tonight in Goderich and when it was over , I beat it for home...3,4,5 000  rpm        When I got home I parked car in driveway .  I moved it later, into garage, and noticed a large puddle of oil..   I opened hood, and oil was on underside of hood, and a lot on chrome timing chain cover area...   I wiped it down, and off, as best I could..  I pulled out oil rubber plug and PVC valve and the other side had a closed grommet    I had not the proper gromet and pipe to air cleaner(yet) so I stuck a closed grommet in hole...   I have picture of covers I got with car.... They have a PCV valve and brather on other side...

100_1209.jpg

__________________

 
427carl


A Poncho Legend!

Status: Offline
Posts: 35601
Date:
Permalink  

These are the Z28 covers       I had PCV valve on left and oil plug for oil adding    and on the right is only one hole and I had a closed grommet on it    The grommet was not a tight fit, so i am guessing  it night have blown out?    The car ran fine with all hole open  and didn't leank at timing cover   I first though it had blown out at the front of oil pan      ?????



77.jpg

I just noticed that the chrome timing cover is not in first photo   hmm  I know why!   the car had a 350 hp cam added laSt year.. and HEI and MSD wires



-- Edited by 427carl on Wednesday 12th of August 2009 09:49:19 PM

Attachments
__________________

 
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
73SC


A Poncho Legend!

Status: Offline
Posts: 20257
Date:
Permalink  

I think you need a twist and turn cap, not that push in grommet. Look at mine, otherwise our valve covers have the same set up, PCV and oil fill on driver's side , breather on passenger side.

IMG_3898.JPG

__________________

Ray White, Toronto ON

Formerly - The one and only 1973 LeMans 454 "Astro-Jet"

Built March 9, 1973 - Oshawa ON

1993 Corvette Convertible LT 1

Built January 10, 1993 - Bowling Green Kentucky 

 
427carl


A Poncho Legend!

Status: Offline
Posts: 35601
Date:
Permalink  

do you have a photo of other side showing your breather?    My valve covers don't have the 2 notches for the oil fill style you have..  Mine are set up for push in..   It seems that using the closed grommet was a no no  but how can it push out so much oil??


36d1_1_sbl.jpg


__________________

 
4SPEED427


A Poncho Legend!

Status: Offline
Posts: 50190
Date:
Permalink  

Yes, you need a breather in the cover opposite of the pcv valve for it to work properly I think.

__________________

1966 Strato Chief 2 door, 427 4 speed, 45,000 original miles 

1966 Grande Parisienne, 396 1 of 23 factory air cars (now converted to a "factory" 4 speed)
73SC


A Poncho Legend!

Status: Offline
Posts: 20257
Date:
Permalink  

This is the only one I can find of the passenger side, it has a breather similar to your first photo. My Valve covers are from an IROC-Z. Have you checked the valve cover bolts for tightness? I think your valve covers are from an 80's era Corvette.

Carl is right though you need a breather. You can us the one from the first photo in that hole I would think. That grommet just doesn't seal tight enough to stop the blow oil.

AstroFlashRS.jpg



-- Edited by 73SC on Wednesday 12th of August 2009 10:08:33 PM

__________________

Ray White, Toronto ON

Formerly - The one and only 1973 LeMans 454 "Astro-Jet"

Built March 9, 1973 - Oshawa ON

1993 Corvette Convertible LT 1

Built January 10, 1993 - Bowling Green Kentucky 

 
427carl


A Poncho Legend!

Status: Offline
Posts: 35601
Date:
Permalink  

Carl Stevenson wrote:t

Yes, you need a breather in the cover opposite of the pcv valve for it to work properly I think.


         I was going to run a tube to the lT1 style air cleaner..  I think from reading other on line info, I was stupid to use a closed grommet disbelief  Its a wonder it didnt blow out, as it was not a tight fit  Maybe it was sucked tight?    I will clean it off and check it next week We are going RVing  tomorrow

 



__________________

 
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
427carl


A Poncho Legend!

Status: Offline
Posts: 35601
Date:
Permalink  

I have this HOSE from/to  air cleaner  just dont have the connector and grommet yet..  It will draw air (breath) from AIR CLEANER?

SB-12.jpg

-- Edited by 427carl on Wednesday 12th of August 2009 10:24:01 PM

__________________

 
73SC


A Poncho Legend!

Status: Offline
Posts: 20257
Date:
Permalink  

Can you show us the air cleaner you will use?

-- Edited by 73SC on Wednesday 12th of August 2009 10:57:48 PM

__________________

Ray White, Toronto ON

Formerly - The one and only 1973 LeMans 454 "Astro-Jet"

Built March 9, 1973 - Oshawa ON

1993 Corvette Convertible LT 1

Built January 10, 1993 - Bowling Green Kentucky 

 
67BBSD


Canadian Poncho Superstar!

Status: Offline
Posts: 6366
Date:
Permalink  

427carl wrote:

I have this HOSE from/to  air cleaner  just dont have the connector and grommet yet..  It will draw air (breath) from AIR CLEANER?

SB-12.jpg

-- Edited by 427carl on Wednesday 12th of August 2009 10:24:01 PM


just put a breather cap on it-don't chance sucking oil from the crankcase only to put it in the carb. Get that engine breathn' so you don't suck the rings out of it.

 



__________________
73SC


A Poncho Legend!

Status: Offline
Posts: 20257
Date:
Permalink  

I agree with Ken, I see these chrome breathers on the shelf at Canadian Tire, probably $7 or so.

__________________

Ray White, Toronto ON

Formerly - The one and only 1973 LeMans 454 "Astro-Jet"

Built March 9, 1973 - Oshawa ON

1993 Corvette Convertible LT 1

Built January 10, 1993 - Bowling Green Kentucky 

 
427carl


A Poncho Legend!

Status: Offline
Posts: 35601
Date:
Permalink  

73SC wrote:

Can you show us the air cleaner you will use?

-- Edited by 73SC on Wednesday 12th of August 2009 10:57:48 PM


This one100_2196.jpg

 



__________________

 
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
73SC


A Poncho Legend!

Status: Offline
Posts: 20257
Date:
Permalink  

Is that your engine, I see breathers on each side, is it fixed now?

__________________

Ray White, Toronto ON

Formerly - The one and only 1973 LeMans 454 "Astro-Jet"

Built March 9, 1973 - Oshawa ON

1993 Corvette Convertible LT 1

Built January 10, 1993 - Bowling Green Kentucky 

 
427carl


A Poncho Legend!

Status: Offline
Posts: 35601
Date:
Permalink  

thats the air breather I have    I have a pcv valve in place and am getting a grommet for right side, to use breather, as you have C2

__________________

 
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.
Canadian Poncho Homepage -> Canadian Poncho -> General Engine Performance Forum -> Small block Chevy Breathing
Tweet this page Post to Digg Post to Del.icio.us
.
Support Canadian Poncho!
Select Amount:
<
.
.
.