Enjoy 5% OFF at VEVOR Canada! and Support Canadian Poncho at the Same Time!
Members Login
Username 
 
Password 
    Remember Me  
Post Info TOPIC: 56 261 getting closer to runnin'


Poncho Master!

Status: Offline
Posts: 2249
Date:
56 261 getting closer to runnin'


Latest additions = new fuel pump, rebuilt carb, and can you identify my coolant catch can?
biggrin.gif

090819.jpg

And of course new radiator and hoses and clamps, new water pump, rebuilt starter, new battery, new plug wires and distributor cap and rotor (points and plugs were fine), a few engine dress-up items, and of course lots of chassis work:
- power front disc brakes with 7" dual booster and new dual master cylinder
- 2" dropped front spindles with roller bearings
- rebuilt rear brakes with new wheel cylinders and self-adjusting mechanism added
- rebuilt front suspension: new ball joints, tie rod ends, tie rod sleeves, urethane control arm bushings, idler arm bushings, control arm bumpers, coil springs, and KYB gas shocks
- rebuilt rear suspension: new custom-made high lift springs, KYB gas shocks on extensions, new U-bolts and shackles
- new custom 1" offset parking brake idler lever for driveshaft clearance
And new Raingear wiper system, Sun tach, interior finishing, wheels and tires, assorted repairs ...
More to do but she will be on the ground running (sort of, good enough to get to the licensing place) within a week or so ...

Dave




__________________

56Pontiac  1956 Pontiac Pathfinder 2dr sedan, 496 - dyno'd 545 hp, stick shift, 4.11 posi - Hot Rod

  1964 Acadian Beaumont SD convert, 283 - factory 195 hp, Powerglide, 3.08 10-bolt - Cruiser

  2012 US-built crew cab truck - Daily Driver and Boat Trailering



Addicted!

Status: Offline
Posts: 477
Date:

She's looking good!
Man that air cleaner is tiny, it's almost as small as your vavle cover breather. smile
Are you sure you wanna drop that big block in there... look at all the room to work on that 6!

__________________

SOLD - '62 Acadian Beaumont 2dr HT

Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons


Poncho Master!

Status: Offline
Posts: 2249
Date:

62Beaumont wrote:

She's looking good!
Man that air cleaner is tiny, it's almost as small as your vavle cover breather. smile
Are you sure you wanna drop that big block in there... look at all the room to work on that 6!



Thanks.

That old-school air cleaner for the 1-bbl. carb came with the car, I kind of like how it looks, just like we would do for cheap dress-up and go-fast-wanna-be many years ago smile.gif

You sure are right about room to work in there now ... first comment of most upon seeing under the hood is "Wow there's a lot of room in there" especially since folks are used to today's jam-packed engine compartments where you can hardly see the motor under all the wires and tubes and such. Old and simple, that's my 56. Hmmm, "old and simple" applies to me too! xd.gif

Dave

 

 



__________________

56Pontiac  1956 Pontiac Pathfinder 2dr sedan, 496 - dyno'd 545 hp, stick shift, 4.11 posi - Hot Rod

  1964 Acadian Beaumont SD convert, 283 - factory 195 hp, Powerglide, 3.08 10-bolt - Cruiser

  2012 US-built crew cab truck - Daily Driver and Boat Trailering



Poncho Master!

Status: Offline
Posts: 2525
Date:

So when is the due date on your 56? Or your eating too many banana pies and not getting to the garage biggrin

__________________


Poncho Master!

Status: Offline
Posts: 2672
Date:

davelacourse wrote:

 can you identify my coolant catch can?
biggrin.gif

090819.jpg

Dave



Schweppes Tonic Water bottle?

 



__________________
Hillar

1970 LS4 (eventually an LS5) Laurentian 2dr hdtp
-and a bunch of other muscle cars...


Poncho Master!

Status: Offline
Posts: 2249
Date:

455gto wrote:

So when is the due date on your 56? Or your eating too many banana pies and not getting to the garage biggrin



Gonna be on the road this week if it kills me. Major problem is I cannot manage to get a nice smooth paint job on the steering column. Driving me nuts! I finally scraped it all down to bare metal yesterday and wiped it with lacquer thinner and sanded it with 220 and primed it, and today I verrrrrrrrrry lightly sanded it with 400 until it was smooth as a baby's butt then painted it verrrrrrrrrrrrrrrry carefully and it is now drying and tomorrow morning we will see if it meets my standards ... other than that it is all ready to go, just have to take it off the jack stands and final torque lug nuts and then off we go to the licensing place, trying to beat the Sept. 1st increase in fees, cross your fingers for me!

Have not eaten any desserts in weeks, been a good boy and been out in the garage smile.gif

Dave

 



__________________

56Pontiac  1956 Pontiac Pathfinder 2dr sedan, 496 - dyno'd 545 hp, stick shift, 4.11 posi - Hot Rod

  1964 Acadian Beaumont SD convert, 283 - factory 195 hp, Powerglide, 3.08 10-bolt - Cruiser

  2012 US-built crew cab truck - Daily Driver and Boat Trailering



Poncho Master!

Status: Offline
Posts: 2249
Date:

Astro Jet wrote:

davelacourse wrote:

 can you identify my coolant catch can?
biggrin.gif



Dave



Schweppes Tonic Water bottle?

 



Yeah you got it! It is surprising how many of them you have to empty before you find one where the label is nice and straight smile.gif

Of course I have plenty of raw material since Gin & Tonic is my drink of choice nowadays, the doctor told me to stop drinking beer but he did not mention not drinking these biggrin.gif

SO now I will have to think of an appropriate prize for you, Hillar, since you are the first to correctly answer the question!!!

Might not be until next week, I am on a mission, eh?

Dave

 



__________________

56Pontiac  1956 Pontiac Pathfinder 2dr sedan, 496 - dyno'd 545 hp, stick shift, 4.11 posi - Hot Rod

  1964 Acadian Beaumont SD convert, 283 - factory 195 hp, Powerglide, 3.08 10-bolt - Cruiser

  2012 US-built crew cab truck - Daily Driver and Boat Trailering

Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons


Poncho Master!

Status: Offline
Posts: 2249
Date:

davelacourse wrote:

Astro Jet wrote:

 

davelacourse wrote:

 can you identify my coolant catch can?
biggrin.gif



Dave



Schweppes Tonic Water bottle?

 



Yeah you got it! It

SO now I will have to think of an appropriate prize for you, Hillar, since you are the first to correctly answer the question!!!

Dave



Since I am just sitting here, enjoying a G&T after a good day's work in the garage, and not wanting to delay any gratification, I have one suggestion for a suitable prize:

A pair of (reproduction) 1959 Cadillac taillights!

59Caddy-taillights_1.jpg

59Caddy-taillights_2.jpg

with pigtail and all, can't remember if there are bulbs inside, probably so, but if not the 57's are cheap anywhere, what you see is what you get.

Gotta be a million uses for these babies, if not on the rear of your car, maybe your snowmobile? Or your snow blower? Or mood lighting over your bar (after converting 110 AC to 12 DC, eh)? Or make a battery-operated Viking helmet that lights up, eh??? (yeah I know that you usually see them with curved horns, but when they are all lit up and dazzling, who's gonna complain!?)

Whaddya say, eh?

Dave

 



__________________

56Pontiac  1956 Pontiac Pathfinder 2dr sedan, 496 - dyno'd 545 hp, stick shift, 4.11 posi - Hot Rod

  1964 Acadian Beaumont SD convert, 283 - factory 195 hp, Powerglide, 3.08 10-bolt - Cruiser

  2012 US-built crew cab truck - Daily Driver and Boat Trailering



A Poncho Legend!

Status: Offline
Posts: 27369
Date:

Great stuff Dave. I miss the 6 in my 54 Chevy. A sound all their own..

__________________

Todd
Site Founder

Like us on Facebook. http://www.facebook.com/CanadianPoncho

Canadian Poncho World Headquarters - Prince Edward Island

 



Poncho Master!

Status: Offline
Posts: 2525
Date:

davelacourse wrote:

455gto wrote:

So when is the due date on your 56? Or your eating too many banana pies and not getting to the garage biggrin



Gonna be on the road this week if it kills me. Major problem is I cannot manage to get a nice smooth paint job on the steering column. Driving me nuts! I finally scraped it all down to bare metal yesterday and wiped it with lacquer thinner and sanded it with 220 and primed it, and today I verrrrrrrrrry lightly sanded it with 400 until it was smooth as a baby's butt then painted it verrrrrrrrrrrrrrrry carefully and it is now drying and tomorrow morning we will see if it meets my standards ... other than that it is all ready to go, just have to take it off the jack stands and final torque lug nuts and then off we go to the licensing place, trying to beat the Sept. 1st increase in fees, cross your fingers for me!

Have not eaten any desserts in weeks, been a good boy and been out in the garage smile.gif

Dave

 



We'll have to see some pictures of it.....other than in the garage.

 



__________________


Poncho Master!

Status: Offline
Posts: 2249
Date:

69Laurentian wrote:

Great stuff Dave. I miss the 6 in my 54 Chevy. A sound all their own..



I admit being tempted to keep the old 6 and add split exhaust, that always sounded sweeeeet on those cars ... but the lure of the big block, you know what I mean, eh Todd? smile.gif

Dave

 



__________________

56Pontiac  1956 Pontiac Pathfinder 2dr sedan, 496 - dyno'd 545 hp, stick shift, 4.11 posi - Hot Rod

  1964 Acadian Beaumont SD convert, 283 - factory 195 hp, Powerglide, 3.08 10-bolt - Cruiser

  2012 US-built crew cab truck - Daily Driver and Boat Trailering



Poncho Master!

Status: Offline
Posts: 2249
Date:

Fuel tank cleaned (oh yeah there was a LOT of crud in it) and coated inside and painted outside, new S.S. pickup and sending unit, upgraded (preparing for the big block) 3/8" fuel line from tank to pump, plan to install everything this week, keep your fingers crossed this will get her motivating down the road with no major problems!

Thanks,
Dave

__________________

56Pontiac  1956 Pontiac Pathfinder 2dr sedan, 496 - dyno'd 545 hp, stick shift, 4.11 posi - Hot Rod

  1964 Acadian Beaumont SD convert, 283 - factory 195 hp, Powerglide, 3.08 10-bolt - Cruiser

  2012 US-built crew cab truck - Daily Driver and Boat Trailering

Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons


Uber Guru

Status: Offline
Posts: 3830
Date:

Had the chance to hear a 57 261 running today. Love the sound of them solids ticking away.

__________________

Drifting offshore is a fine way to spend a day!!



Guru

Status: Offline
Posts: 505
Date:

I have a 261 Pontiac engine in my 1953 Chevy panel truck. It's not quite at the point where it's running, but close. Can't wait to try it out next spring.

__________________


Guru

Status: Offline
Posts: 573
Date:

Lookin good Dave.

__________________
Page 1 of 1  sorted by
Quick Reply

Please log in to post quick replies.

Tweet this page Post to Digg Post to Del.icio.us
.
Support Canadian Poncho!
Select Amount:
<
.
.
.