Members Login
Username 
 
Password 
    Remember Me  
Canadian Poncho Homepage -> Canadian Poncho -> Beaumont Chassis Tech Forum -> Front shock mounting bolts and clips.
Post Info TOPIC: Front shock mounting bolts and clips.
Beaumont4008


Uber Guru

Status: Offline
Posts: 3932
Date:
Front shock mounting bolts and clips.
Permalink  

Just wondering what you guys use for the lower bolts on your front shocks. I am missing the bolts and clips used from the factory. I know I could use bolts and nuts but are the original bolt and clip available anyware. Makes for a easier install.

__________________
4SPEED427


A Poncho Legend!

Status: Offline
Posts: 48751
Date:
Permalink  

I got some recently and I think it was out of our stock here at work. You should be able to pick them up at a Piston Ring or NAPA store too I think. If not, let me know...

__________________

1966 Strato Chief 2 door, 427 4 speed, 45,000 original miles 

1966 Grande Parisienne, 396 1 of 23 factory air cars
Beaumont4008


Uber Guru

Status: Offline
Posts: 3932
Date:
Permalink  

Went to Piston Ring, they had a 5/16 extruded nut by AutoBody Master brand pack of 7 ea. Not the same but should work. 



The one on the right is the only one that was still on the car. The AutoBody one a little longer than needed but should work. 

PICT0284.JPG

__________________
4SPEED427


A Poncho Legend!

Status: Offline
Posts: 48751
Date:
Permalink  

Good stuff. I also found some of those pointy little bolts. Seems to me they were PAPCO but not sure.

__________________

1966 Strato Chief 2 door, 427 4 speed, 45,000 original miles 

1966 Grande Parisienne, 396 1 of 23 factory air cars
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.
Canadian Poncho Homepage -> Canadian Poncho -> Beaumont Chassis Tech Forum -> Front shock mounting bolts and clips.
Tweet this page Post to Digg Post to Del.icio.us
.
Support Canadian Poncho!
Select Amount:
<
.
.
.