Looking also for a rear end, 10 or 12blt, 355-373gear, posi unit...again, in ottawa...thanks Dave Ps, 1970 Strato Chief....thanks
-- Edited by BYGDDY on Friday 23rd of October 2009 05:51:09 AM
Iwould guess there is a 12 bolt in it! bend over the rear bumper, real low, and peek at the rear end cover. If it has 2 bolts showing its a 12 bolt Call around and have the gears changed piece of cake
I went the route of finding a ebay 12 bolt housing in Buffalo NY, it cost me only $300, and it came with a very nice 3 series posi carrier in it. I rebuilt the housng, all new bearings and seals, moser axles. Rebuilt the carrier, added 3.73's. Shimmed it all in to get a nice pattern. New yoke. Nice cover. It cost me a good buck. I'd say I have about 2K into it. And that's with all my own labour. Bought all the tools I needed, and sold them when done. It was a learning experiance to be sure, not easy, but it took some of the mystery out of this rear end "black art".
You could just buy a new 8.2 3 series posi carrier (about $550), add the gear you want and install it in your 10 bolt (if you have a 10) housing. I think you'd still be looking at around $1200 to do it.
Perhaps you'll get lucky and find a complete unit ready to bolt in.
Mark
-- Edited by cdnpont on Saturday 24th of October 2009 03:30:44 AM
__________________
65 Laurentian post, 67 Grande Parisienne 4 door HT.