hey yall its me again im looking for a parts car with a good frame the car is a 1967 pontiac parisienne it would be even better if it had a good interior
Hey guys, I found a spot on my frame that could be repaired, but I have a chance to pick up a pristine frame from a 67 4 door that may be a better choice. Are the 67 and 68 frames the same? The candidate 67 car is a 327/300 and my 68 is a big block car, so 4 link in both? Thanks, Scott
I do not believe the 327 will have a four link unless it was a high horse motor. Otherwise I believe the frames are the same.
1969 Ragtop frame. Epoxy primed and painted. All poly susp. All new front end parts. Detailed and Epoxy painted New AGR 12.1 Ratio steering box Big Addco front bar Front disc brakes Rear disc brakes Disc/Disc Proportioning valve Completly Rebuilt 12 bolt. Eaton 3 series 3.73's, T/A performace braced cover. Strange axles Adjustable Panhard bar Adjustable upper control arms Spohn Performance big rear bar New springs Air lift 1000 airbags New fuel and brake lines w/braided flexlines Crossmember set up for 700R4 Edelbrock IAS shocks
Throw a body on, hook er' up and go!
__________________
65 Laurentian post, 67 Grande Parisienne 4 door HT.
1969 Ragtop frame. Epoxy primed and painted. All poly susp. All new front end parts. Detailed and Epoxy painted New AGR 12.1 Ratio steering box Big Addco front bar Front disc brakes Rear disc brakes Disc/Disc Proportioning valve Completly Rebuilt 12 bolt. Eaton 3 series 3.73's, T/A performace braced cover. Strange axles Adjustable Panhard bar Adjustable upper control arms Spohn Performance big rear bar New springs Air lift 1000 airbags New fuel and brake lines w/braided flexlines Crossmember set up for 700R4 Edelbrock IAS shocks