Members Login
Username 
 
Password 
    Remember Me  
Canadian Poncho Homepage -> Canadian Poncho -> Acadian/Ventura Chassis Tech Forum -> Proportioning valve
Post Info TOPIC: Proportioning valve
Lefty


Uber Guru

Status: Offline
Posts: 3020
Date:
Proportioning valve
Permalink  

Anyone know which outlet is for the front disk and which is for the rear Drums
thanks
slso should i take the front to the slpice brass on the inner driver side
then to th epass side (as per original)
or should i take both front disks seperatly to the Prop valve

there is one outlet that has a filler cap and one to the left of the
bolt closer to the front (left of ABS logo)
and a larger one (that is then reduced) closer to the brake booster..
thanks

Attachments
__________________

Surrey BC

1963 Acadian Beaumont Sport Deluxe
http://www.63acadian.com/
davelacourse


Poncho Master!

Status: Offline
Posts: 2249
Date:
Permalink  

Would have been nice if your supplier had included instructions, eh? blankstare

The brake line doc I sent you will show you which is which and how to run the lines. Here's the key part:

pv.jpg

The fitting on top is for brake lights (I did not use mine, I used the stock brake light switch at the pedal).

Dave





__________________

56Pontiac  1956 Pontiac Pathfinder 2dr sedan, 496 - dyno'd 545 hp, stick shift, 4.11 posi - Hot Rod

  1964 Acadian Beaumont SD convert, 283 - factory 195 hp, Powerglide, 3.08 10-bolt - Cruiser

  2012 US-built crew cab truck - Daily Driver and Boat Trailering
Beaumont4008


Uber Guru

Status: Offline
Posts: 3932
Date:
Permalink  


Here is a good pic for you. Looks like the same one you have.




img207.jpg

__________________
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.
Canadian Poncho Homepage -> Canadian Poncho -> Acadian/Ventura Chassis Tech Forum -> Proportioning valve
Tweet this page Post to Digg Post to Del.icio.us
.
Support Canadian Poncho!
Select Amount:
<
.
.
.