kingpin kits

hwscowboy · Guru

kingpin kits

bob53 · Addicted!

Try these guys click ask for Norm, he should be able to help you out.

Fitz · Guru

On a 53-54 canadian Pontiac, the Chevy kingpin kit work perfectly, but you can't interchange some parts on the steer axle like the lower A arm and the main axle (unless you cut and weld the engine support) from a Chevy one.

Don't use the kingpin kit from a US Pontiac model.

Also, you can use the Chevy center link bushing kit, it's the same as canadian Pontiac of the same year.

IF you need picture of the steer axle rebuild let me know.

Fitz.

hwscowboy · Guru

ok a silly queation,does the model matter.I have found them for 210's,150's i would like to get them on the way soon.Also any one know where i can find e-brake cables for my 54.

1954 Ken · Addicted!

Good question. Im actually just pulling off my e brake cables. They need to be replaced. Ill let you know what I find....

Another thing im going to be needing are the Engine mounts. I still have to look up just what is involved in changing them

hwscowboy wrote:

ok a silly queation,does the model matter.I have found them for 210's,150's i would like to get them on the way soon.Also any one know where i can find e-brake cables for my 54.

Fitz · Guru

For the kingpin, no matters the chevy model. For the e-brake cable "chevy's of the 40's" have them and it look really close to the original.

For the engine mount, the front one is pure Pontiac, you can use the US model one, on side near the bell housing use the engine mount from a 46 chevrolet from "chevy's of the 40's" also.

Fitz

hwscowboy · Guru

i have seen the cables on chevs of the forties as well,i've checked on ebay but not much luck there.As for the engine mounts the front you can find on ebay easy,the rears are there to but look under 39-45 chevy.thats how i found mine i ended up buying 4 so i had a spare set,they are different from side to side.trw 2004 is the part # on mine.

1954 Ken · Addicted!

Where is this "Chevys of the 40's" Fitz?

Fitz wrote:

For the kingpin, no matters the chevy model. For the e-brake cable "chevy's of the 40's" have them and it look really close to the original.

For the engine mount, the front one is pure Pontiac, you can use the US model one, on side near the bell housing use the engine mount from a 46 chevrolet from "chevy's of the 40's" also.

Fitz

bob53 · Addicted!

Here ya go Ken

Chevys of the 40's

Bob

-- Edited by bob53 on Tuesday 5th of October 2010 07:20:47 AM

1954 Ken · Addicted!

Before I start hitting the internet for places in the states, im going to look a little more locally, like with that Norm from Mid Canada Suspension. I called today and hes closed Wed and Thurs. Ill try again Friday. With my carb still being about 2 weeks away from being done, I have a little time to play.