Does anyone here have a picture of a 72 LeMans radiator support bolted on the car(With bushings installed) I'm trying to see the correct way this is assembled.
The rubber isolator with the male goes under the rad support. On top of the frame. This is the one with the steel sleeve in it. The upper isolator (cup / female) goes on top of the rad support mount with the cupped side down. Shim under the lower isolator to set the height. You may have to tighten the bolt to do this. The bolts comes up from the bottom and the nut goes no top. One of the shims / washers on the bolt where is passes through the hole in the fram and one is used under the nut on top. It is easier to have the fenders and hood fastened and lined up. The rad support bolts can be the last thing you tighten up. Let me know if you need pics
-- Edited by SD 396 on Tuesday 5th of October 2010 04:34:31 PM
