Hi guys, when the previous owner gutted the interior , he must of removed some old brackets for the rear seats. I have two small thin u-shaped clips that i assume hold down the back of seat, but there's nothin that I can see to keep the bottom seat in place!! As well , there's four holes where the floor begins to transition upwards, they go clean through the floor, would these be for seat belts or something else!? Ill try to get a pic later of what I'm talkn about!
Thanks for any insight!!
there should be clips that can be spot welded to your seat pan to hold the front of the seat ( lower part )
these are available with seat pan suppliers and can be welded in place but make shure to weld them at the right spot
the holes in the upper section of the seat pan ( almost vertical ) are the bolt holes for the seat belts there should be a nut welded under there in order to insert a bolt ( bolts also available in repro )
__________________
1967 BEAUMONT 2 DOOR POST ALL NEW 283
1965 CHEV BEL AIR 230 3 SPEED
I LIKE THEM PLAIN , I LOVE BENCH SEATS , POVERTY CAPS,NO TRIM.
I HAVE THIS THING FOR A 4 DOOR 65 BISCAYNE 6 CYL STD DONT KNOW WHY ?
