2024 Canadian Poncho Calendars are Now Available! CLICK HERE

 

 

Members Login
Username 
 
Password 
    Remember Me  
Post Info TOPIC: rebuilding Rear End


Uber Guru

Status: Offline
Posts: 3020
Date:
rebuilding Rear End


Does anyone know of a good shop in the Surrey  Langley area

that could rebuild my factory Rear End ??

Has not be touched since 63.

Or is it hard to do yourself.

I can hear a nise from the rear when the top is up

could be just a brake/drum noise , it gets a bit loader when i apply brakes.

 

Thanks



__________________

Surrey BC

1963 Acadian Beaumont Sport Deluxe
http://www.63acadian.com/



A Poncho Legend!

Status: Offline
Posts: 35601
Date:

Lefty wrote:

I can hear a noise from the rear when the top is up

could be just a brake/drum noise ,

 

 

*    it gets a bit loader when i apply brakes.

 

 


 *  check that first?



__________________

 



Guru

Status: Offline
Posts: 778
Date:

When I lived in the lower mainland a couple of my friends used iwe rear ends in burnaby and were pretty happy with them...

http://www.iwerearendsonly.com/Contact.php



__________________


Paul

67 Beaumont 2dr/ht

 454/t400/9inch

In Lethbridge, Alberta

My build thread! Starting over, My 67 Beaumont build thread.



Uber Guru

Status: Offline
Posts: 3020
Date:

Thanks, i will check brakes and have the rear end serviced, it due for a good check - up


__________________

Surrey BC

1963 Acadian Beaumont Sport Deluxe
http://www.63acadian.com/



Uber Guru

Status: Offline
Posts: 3020
Date:

How do i tell if the rear end in my car has Standard rear axles or a positraction rear axles ??
the manual calls for different fluids
standard S.A.E. 80 pass car duty Hypoid (lead soap active Sulphur type)
Positraction S.A.E. 80 lead soap Sulphur Sapanifiable chlorine "SCL" Multi-Purpose Gear Lubricant

I don't want to use the wrong stuff
Thanks



__________________

Surrey BC

1963 Acadian Beaumont Sport Deluxe
http://www.63acadian.com/



Uber Guru

Status: Offline
Posts: 3630
Date:

Lefty wrote:

How do i tell if the rear end in my car has Standard rear axles or a positraction rear axles ??


 Either check the axle code or jack up the rear of the car and spin the wheels. If your posi is decent and the tranny in park, you will not be able to turn them.(only if the posi is worn out) 

 If it is an open axle, non posi, one tire will spin in reverse of the other. The best way if you are not entirely sure is to pull the cover and inspect. A non posi will have just a pin in the middle and if it is a posi, there will be a spring in the middle with then pin.. Plus clutches behind either side gear...

 The last resort, do a burn out down the street and if it is a posi, there will be 2 strips of rubber verus 1 strip for a non posi!!!! (lol)



-- Edited by 67Poncho on Wednesday 2nd of November 2011 05:04:30 PM

__________________

Vincent Jr.



Uber Guru

Status: Offline
Posts: 3020
Date:

Do a burn !! would love that !! only way i can do a burn is to go really fast and hit the brakes..
One tire spins in the opposite of the other i did not think it was a posi..
thanks



__________________

Surrey BC

1963 Acadian Beaumont Sport Deluxe
http://www.63acadian.com/



Uber Guru

Status: Offline
Posts: 3020
Date:

wonder if i should try and drain the "1963" fluid from the rear before i top it off..


__________________

Surrey BC

1963 Acadian Beaumont Sport Deluxe
http://www.63acadian.com/



Uber Guru

Status: Offline
Posts: 3630
Date:

I would suggest yes! Start fresh........



__________________

Vincent Jr.



Uber Guru

Status: Offline
Posts: 3020
Date:

there does not seem to be a drain plug, do i have to "pump" it out ??
or is is better to just go to a shop..



__________________

Surrey BC

1963 Acadian Beaumont Sport Deluxe
http://www.63acadian.com/



Poncho Master!

Status: Offline
Posts: 1740
Date:

You need to remove the rear cover to drain the diff. Then reseal the cover with a gasket or silicone. I like silicone myself.



__________________

'68 Parisienne 2+2 Convertible Matador Red (Resale Red but not for sale).



Uber Guru

Status: Offline
Posts: 3020
Date:

there in lies the problem, there is no rear cover on these diff's.
Manual says lubricant should only be drained when the differential carrier assembly is
removed. I do not think i have the special tools to do that.


__________________

Surrey BC

1963 Acadian Beaumont Sport Deluxe
http://www.63acadian.com/



Uber Guru

Status: Offline
Posts: 3630
Date:

Lefty wrote:

there in lies the problem, there is no rear cover on these diff's.
Manual says lubricant should only be drained when the differential carrier assembly is
removed. I do not think i have the special tools to do that.


  I wasn't sure if that was your design or not! What I did with my '70, I used a suction gun through the fill hole and did it that way... It worked well enough for me!!



__________________

Vincent Jr.



Uber Guru

Status: Offline
Posts: 3020
Date:

thanks, will pick one up from princess auto, a whole $8

__________________

Surrey BC

1963 Acadian Beaumont Sport Deluxe
http://www.63acadian.com/



Guru

Status: Offline
Posts: 719
Date:

Bin their,Imo,Changing the fluid will do nothing except cost you time and $,if its making noise,its already too late for that.Take it to a r/e guy.

sweet ride by the way....................



-- Edited by 1964Canso on Thursday 3rd of November 2011 09:06:11 PM

__________________

"When the power of love overcomes the love of power,the world will know peace"
  
  

http://s51.photobucket.com/albums/f398/1964Acadian/?albumview=slideshow                  



 







                                  



Poncho Master!

Status: Offline
Posts: 1740
Date:

On some of those removable carrier diffs you could remove one of the bottom bolts and drain. If you aren't rushed, let it drain overnight for it's not a big hole. Easier than trying to suck up gear oil.



__________________

'68 Parisienne 2+2 Convertible Matador Red (Resale Red but not for sale).



Uber Guru

Status: Offline
Posts: 3020
Date:


went for a drive with some one else driving and i think the noise is coming from either the EM brake cable dragging or something else in the brakes
I changed out as much of the fluid as i could by pump, boy was it ever black and smelly !!
taking out a couple of the bottom bolts sounds like a good idea, i will take it for a drive to get the new fluid pumping and then drain it again



__________________

Surrey BC

1963 Acadian Beaumont Sport Deluxe
http://www.63acadian.com/



Uber Guru

Status: Offline
Posts: 3630
Date:

Does the noise change on coast and acceleration? Whine, growl, scrape, knock...etc?

 



-- Edited by 67Poncho on Thursday 3rd of November 2011 10:02:52 PM

__________________

Vincent Jr.



Uber Guru

Status: Offline
Posts: 3020
Date:

No it is a very quite ticking sound gets a bit loader on breaking
cannot here it with the top down.when it is up on jacks i cannot hear it when i turn the wheels by hand.
will put it up tomorrow on the driveway and run it and see if i can hear anything.



__________________

Surrey BC

1963 Acadian Beaumont Sport Deluxe
http://www.63acadian.com/



Uber Guru

Status: Offline
Posts: 3630
Date:

Tick?? Almost sounds like the park brake cable return spring hitting the heads of the studs inside the drum....?

 If there is no whine or growl, then the diff gears sound fine to me! Yes, set it in gear on the stands, be careful, and listen. Also, if you get time, remove the drums and inspect for metal contact of the park brake return spring and the stud heads....



__________________

Vincent Jr.



A Poncho Legend!

Status: Offline
Posts: 48634
Date:

One other option, although it's a longshot is a bad wheel bearing. I once saw a late 60's Vista Cruiser that had a bad bearing. I think one of the rollers had broken apart or something. Anyway, at slow speeds it had a rhythmic click, click, click to it. When the axle was pulled out, the bearing fell apart.

__________________

1966 Strato Chief 2 door, 427 4 speed, 45,000 original miles 

1966 Grande Parisienne, 396 1 of 23 factory air cars



Uber Guru

Status: Offline
Posts: 3630
Date:

 Never had that..... But I did have a bad pinion bearing in a '02 GMT 800 truck that the noise was so bad I was going to look for a complete diff to replace it... It made a snapping noise too!  And, come to think of it, it was more noisy on a quick deaccel...

 When I had the carrier out of it, you could feel it in the pinion "bump" when you turned it by itself!

 Thanks for jogging my memory by bringing up bearings...



__________________

Vincent Jr.



Uber Guru

Status: Offline
Posts: 3020
Date:

tried to remove one of the bottom bolts, but they are nuts so i will pump it out after i run it for a while,
the first pump out got most of it out..
but later in the year i will pull it out and get a shop to replace all the bearings just to be safe..



__________________

Surrey BC

1963 Acadian Beaumont Sport Deluxe
http://www.63acadian.com/

Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.

Tweet this page Post to Digg Post to Del.icio.us
.
Support Canadian Poncho!
Select Amount:
<
.
.
.