Enjoy 5% OFF at VEVOR Canada! and Support Canadian Poncho at the Same Time!
Members Login
Username 
 
Password 
    Remember Me  
Canadian Poncho Homepage -> Canadian Poncho -> Beaumont Body Tech Forum -> Need help identifing my "hole"
Post Info TOPIC: Need help identifing my "hole"
jlysholm


Guru

Status: Offline
Posts: 611
Date:
Need help identifing my "hole"
Permalink  

Hi guys,

Went a little stir crazy this past weekend ...all the crumby weather recently had me tearing my car apart instead of driving it!!! ...so I decided to restore the front wheel wells and heater box cover on the Beau.

I removed the many layers of paint and flaking undercoating using a glass bead blaster.  Amazing...no rust damage anywhere (they are origonal to the car)

On the drivers side... there is a very ugly hole (not sure if it's supposed to be there or not?) confuse...when I looked through the hole I could see the shift fork retaining nut (connected to the manual transmission).

...Can someone tell me if it's supposed to be there or not???

Also...Did Beaumonts come from the factory undercoated? ...or was that a dealership option? (I don't want to undercoat them again)

Painting them correct (Satin Black)

...Sorry about the pics (taken via my Crackberry)

Thanks in advance for your help.

Kyle

 



Attachments
__________________
"you can't burn out, if your not on fire" -Jim Morrison
CdnGMfan


Canadian Poncho Superstar!

Status: Offline
Posts: 4960
Date:
Permalink  

My Oshawa-built 67 Chevelle does not have the hole in the lower part of the inner fender that you show. My car left the factory with a Powerglide, if that makes any difference. Unless there are different part #s shown for the inner fenders of the manual vs. automatic cars, I would surmise that it is a field service thing. There were holes in the inner fenders that were used to hold clips for wire bundles to the horn relay & alternator.

 

My car did not have undercoating from the factory. Surprisingly the floors were pretty good for being an Ontario car. Canadian cars were painted differently than the U.S. cars on the floors though, painted with body colour and in enamel to give the northern cars a fighting chance for a few years. There actually was an RPO for underbody oil spray on the Canadian A-bodies, RPO X17.



__________________

67 Chevelle Malibu Sport Coupe, Oshawa-built 250 PG never disturbed.

In garage, 296 cid inline six & TH350...

Cam, Toronto.


I don't judge a man by how far he's fallen, but by how far back he bounces - Patton
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
jlysholm


Guru

Status: Offline
Posts: 611
Date:
Permalink  

Thanx CdnGMfan,

I believe your correct.  The hole looks to be a "field service repair"

A previous owner or mechanic probably couldn't be bothered to remove the inner fender to access the shift fork nut, so they carved a hole with a very dull drill bit!

I'll weld it up this morning.

Cheers!

Kyle



__________________
"you can't burn out, if your not on fire" -Jim Morrison
Canadian Poncho


A Poncho Legend!

Status: Offline
Posts: 27404
Date:
Permalink  

I seem to recall hearing a lot of Olds 442 red inner fenders met a similar fate...


__________________

Todd
Site Founder

Like us on Facebook. http://www.facebook.com/CanadianPoncho

Canadian Poncho World Headquarters - Prince Edward Island

 
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.
Canadian Poncho Homepage -> Canadian Poncho -> Beaumont Body Tech Forum -> Need help identifing my "hole"
Tweet this page Post to Digg Post to Del.icio.us
.
Support Canadian Poncho!
Select Amount:
<
.
.
.