2024 Canadian Poncho Calendars are Now Available! CLICK HERE

 

 

Members Login
Username 
 
Password 
    Remember Me  
Post Info TOPIC: Back Drive Linkage Hitting Header


Member

Status: Offline
Posts: 20
Date:
Back Drive Linkage Hitting Header


Has anyone had any issues with their back drive linkage hitting the header. I can only shift from Park to Neutral(console shift car) and when I try to go to Drive the back drive Rod that goes to the shifter lever on the transmission hits on top of the header, preventing me from shifting. the headers are made by Patriot, I installed before I received my back drive linkage which was missing on my car like many others. I know I need it to activate my reverse lights/neutral safety switch. my car is a 1972 LeMans with a 400 small block chevy, and TH350 tranny. Any help on this issue is greatly appreciated. 



__________________


Canadian Poncho Superstar!

Status: Offline
Posts: 5681
Date:

How's the trans. mount on cross member??? May have sagged if old & cause this problem, or your linkage you installed isn't correct. Is the SBC Chevy the right engine or was it a Blue block "poncho" in there originally? Possible wrong header for chassis also a thought!!! OH my head hurts now, too much thinking Pete

__________________

Some times I wake up GRUMPY, but today I let her sleep in    !!!!!!!! BLACKSTOCK Ont.



Member

Status: Offline
Posts: 23
Date:

Musicman,

What you're describing is very common. Many. maybe most, A body cars with headers don't have backup lights or a column lockout. I'm sure somebody has worked it out but a lot of guys just leave the back drive off.

__________________
Having a 10 second import is like coming out of the closet. It will surprise a lot of people but you'll still be gay.


A Poncho Legend!

Status: Offline
Posts: 35601
Date:

heres a blurb on it...     Just take it off and think of a cool way to hold the rod up inside the car     I have done a bunch of them in the past

 

Reverse lockout linkage (Backdrive linkage)

(1/2) > >>

tigs69:
Could someone please explain what the Reverse lockout linkage (Backdrive linkage) does. I have a 69 RS with a saginaw 4speed, 327ci  we are putting back together after 16 years in the garage and can't find the lower rod. The steering colume locks fine. Is it some kind of safety feature or  ??? Thanks for any info.

william:
It was a federal mandate to help discourage auto theft. The car had to be Park [auto] or reverse [manual] in order to remove the key from the ignition. 

The parts were fairly specific-Muncie stuff will not work on a Saginaw. In fact a Muncie SB used a different lower lock rod than a BB.

If you can't find the correct lower rod [3955767, same as used on a standard 3-speed floor shift] it should be fairly easy to fab one out of mild steel rod.

tigs69:
Thanks for the response William. But I quit don't understand, I do not have that lower rod installed and my key comes out fine in any gear so I am way confused!  ???

william:
The lower collar on the column is rotated to the lock position. Rotate it clockwise with the key in the run position. Ignition switch will not go to the lock position and the key will not come out.

The lock out linkage usually got in the way of headers and was trashed. The collar was left in the lock position and the bulbs were taken out of the reverse lamps.

tigs69:



__________________

 

Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.

Tweet this page Post to Digg Post to Del.icio.us
.
Support Canadian Poncho!
Select Amount:
<
.
.
.