Enjoy 5% OFF at VEVOR Canada! and Support Canadian Poncho at the Same Time!
Members Login
Username 
 
Password 
    Remember Me  
Canadian Poncho Homepage -> Canadian Poncho -> Acadian/Ventura Body Tech Forums -> 66 Canso rocker extensions
Post Info TOPIC: 66 Canso rocker extensions
hawkeye5766


Canadian Poncho Superstar!

Status: Offline
Posts: 6043
Date:
66 Canso rocker extensions
Permalink  

Taking some parts to chrome shop tues (not console) noticed my rocker trim extensions have a middle mounting hole but they don't look stock? Anyone know if they had 2 or 3 holes, may need to get them filled. Same hole,same spot, both sides?

DSC05988.JPG DSC05990.JPG

This hole looks stock

DSC05991.JPG

 

 



Attachments
__________________
4SPEED427


A Poncho Legend!

Status: Offline
Posts: 49986
Date:
Permalink  

hawkeye5766 wrote:

Taking some parts to chrome shop tues (not console) noticed my rocker trim extensions have a middle mounting hole but they don't look stock? Anyone know if they had 2 or 3 holes, may need to get them filled. Same hole,same spot, both sides?

 DSC05990.JPG




So you are thinking the hole on the right hand side is not stock?

I had a set of these but don't think I took pictures before I sold them. However, there are two designs of that moulding in 66 and if I had to guess I'd say the holes are stock that you have. Do both mouldings have that hole? Have you measured, are they in the identical spot? If so, I bet they are proper.

__________________

1966 Strato Chief 2 door, 427 4 speed, 45,000 original miles 

1966 Grande Parisienne, 396 1 of 23 factory air cars (now converted to a "factory" 4 speed)
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
hawkeye5766


Canadian Poncho Superstar!

Status: Offline
Posts: 6043
Date:
Permalink  

Yes, thinking the right hole is not stock, will measure to see if exact the same on both sides. Just had me wondering since the other 2 are recessed and higher?confuse



__________________
4SPEED427


A Poncho Legend!

Status: Offline
Posts: 49986
Date:
Permalink  

Man, I wish I could remember!

__________________

1966 Strato Chief 2 door, 427 4 speed, 45,000 original miles 

1966 Grande Parisienne, 396 1 of 23 factory air cars (now converted to a "factory" 4 speed)
hawkeye5766


Canadian Poncho Superstar!

Status: Offline
Posts: 6043
Date:
Permalink  

May just leave, only ones that will know are you, me and whoever reads this post.wink



__________________
ARCADIAN


Poncho Master!

Status: Offline
Posts: 2671
Date:
Permalink  

I don't think mine have that hole. I will check tonight. I am at work now and only 4 days left.

__________________
GrtDanes


Poncho Master!

Status: Offline
Posts: 1437
Date:
Permalink  

hawkeye5766 wrote:

May just leave, only ones that will know are you, me and whoever reads this post.wink

Count me in and im telling everyone  



__________________
"The pursuit of perfection is frustrating and a waste of time because nothing is ever perfect. The pursuit of excellence is commendable and worth while. Therefore strive for excellence, not perfection"
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
hawkeye5766


Canadian Poncho Superstar!

Status: Offline
Posts: 6043
Date:
Permalink  

ARCADIAN wrote:

I don't think mine have that hole. I will check tonight. I am at work now and only 4 days left.

 Thanks Chris, do you have a pic of where they are mounted. Mine are about 3" shorter that rear 1/4 so I don't know if they mount more towards the back of the car or more towards the wheel well opening. Thanks Jim



__________________
ARCADIAN


Poncho Master!

Status: Offline
Posts: 2671
Date:
Permalink  

Hi Jim, I don't have anyway of posting a picture(s) so I hope this description helps. My moldings have the 3 factory holes where yours are and are attached with flush mount screws, all factory but they have no holes drilled on the 3 round tabs on the lower areas. They fit just under the lower beltline and begin about 1/4" behind the wheel well moldings. I hope this is of help to you.

__________________
hawkeye5766


Canadian Poncho Superstar!

Status: Offline
Posts: 6043
Date:
Permalink  

Thanks a bunch Chris, I now know they must be stock holes and can get them to the chrome shop.

__________________
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.
Canadian Poncho Homepage -> Canadian Poncho -> Acadian/Ventura Body Tech Forums -> 66 Canso rocker extensions
Tweet this page Post to Digg Post to Del.icio.us
.
Support Canadian Poncho!
Select Amount:
<
.
.
.