2024 Canadian Poncho Calendars are Now Available! CLICK HERE

 

 

Members Login
Username 
 
Password 
    Remember Me  
Post Info TOPIC: Hydramatic Speedo Gear


Member

Status: Offline
Posts: 19
Date:
Hydramatic Speedo Gear


Having no luck here guys. P52 hydramatic dual range 4 speed auto transmission.

From the pictures below you can see the one that was removed and the damage to it. Found another one at fatsco transmission out of a 52. Looked promising until I did a more complete compare. Diameter of the gear is wrong. Both have 18 teeth marked on them and are the same color. the bullet is slightly different which doesn't seem to matter based on the threads in the housing.

So. Where would one look for a NOS part with the correct diameter size for this transmission?

Anyone out there with a detailed parts manual with part numbers for this piece?

Any other ideas?

IMG_2148.JPG

IMG_2149.JPG

IMG_2150.JPG



Attachments
__________________


Addicted!

Status: Offline
Posts: 213
Date:

I've got a Hydramatic that I got with a donor engine-not sure what year, but if it's got the gear you need you can have it.
Let me pull it out and see if it's a match and condition.
Murray

__________________

"Look Ma- no chassis!"



Addicted!

Status: Offline
Posts: 213
Date:

OK- The unit I have has a metal drive gear with part # 1315021-19. It has 19 teeth. I can't find it in my parts book.

My master parts book calls for a (Group 4:343) #3704230  (notes: Gear, speedo. drive- includes driven gear and shaft) for '51-'54 Models 20-22 with AT.



Attachments
__________________

"Look Ma- no chassis!"



Poncho Master!

Status: Offline
Posts: 2249
Date:

Suggest checking for local speedometer cable shop, take your old broken parts and they should be able to make up whatever you need (I will be paying a visit to mine in the future, since my old cable is shot and too short to reach new transmission).

Dave

__________________

56Pontiac  1956 Pontiac Pathfinder 2dr sedan, 496 - dyno'd 545 hp, stick shift, 4.11 posi - Hot Rod

  1964 Acadian Beaumont SD convert, 283 - factory 195 hp, Powerglide, 3.08 10-bolt - Cruiser

  2012 US-built crew cab truck - Daily Driver and Boat Trailering

Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.

Tweet this page Post to Digg Post to Del.icio.us
.
Support Canadian Poncho!
Select Amount:
<
.
.
.