Enjoy 5% OFF at VEVOR Canada! and Support Canadian Poncho at the Same Time!
Members Login
Username 
 
Password 
    Remember Me  
Canadian Poncho Homepage -> Canadian Poncho -> 65-70 Full Size Body Tech Forum -> Replacement body panels for 67 Parisienne
Post Info TOPIC: Replacement body panels for 67 Parisienne
SGS Welding


Guru

Status: Offline
Posts: 504
Date:
Replacement body panels for 67 Parisienne
Permalink  

Is there any supplier out there?



__________________

67 Parisienne Convertible 

67 Parisienne 2 Door Hardtop 
SGS Welding


Guru

Status: Offline
Posts: 504
Date:
Permalink  

Front fenders? Rear quarters? Rockers? Door skins?

__________________

67 Parisienne Convertible 

67 Parisienne 2 Door Hardtop 
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
4SPEED427


A Poncho Legend!

Status: Offline
Posts: 49987
Date:
Permalink  

I think the silence you are getting is not that guys are ignoring you, it's just that nobody has them from what most of the guys here know of.

__________________

1966 Strato Chief 2 door, 427 4 speed, 45,000 original miles 

1966 Grande Parisienne, 396 1 of 23 factory air cars (now converted to a "factory" 4 speed)
67curves


Addicted!

Status: Offline
Posts: 257
Date:
Permalink  

they are just about impossible to find. I looked for 3 years trying to find these. The guy that did the body work found some somewhere. I never asked where he got them, just happy he found some. I have a set of doors for spares just in case.



__________________
SGS Welding


Guru

Status: Offline
Posts: 504
Date:
Permalink  

I called the nor/am place guys have mentioned on the forum. Seems they have some rust repair panels?? Is that the route most guys go? Carl thanks for that, my feelings were just about to get hurt! (Just kidding) I'm all seriousness this chat forum has been awesome.

__________________

67 Parisienne Convertible 

67 Parisienne 2 Door Hardtop 
4SPEED427


A Poncho Legend!

Status: Offline
Posts: 49987
Date:
Permalink  

I know that typically the rust repair panels fit crappy. However, I'm very limited with my skills working body panels, so I always figure that it's better to start off with a poorly made panel and try to rework it to fit well. I imagine the guys with good metal skills would rather just build from scratch.

__________________

1966 Strato Chief 2 door, 427 4 speed, 45,000 original miles 

1966 Grande Parisienne, 396 1 of 23 factory air cars (now converted to a "factory" 4 speed)
slammedlt1


Member

Status: Offline
Posts: 16
Date:
Permalink  

classic industries has impala patch panels. You would loose that coke bottle lower body line though... I am not extremely partial to it but having that arch would be a huge bonus I am considering ordering them and using them to correct some shitty body work on my car... its an idea...

__________________
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
Nov 18 to Dec 2 Black Friday UP TO 50% OFF Plus Huge Coupons
427carl


A Poncho Legend!

Status: Offline
Posts: 35601
Date:
Permalink  

A older body man can "build" them      Best set I saw, was cut out of southern sheet metal and welded in to fit

 

most of these Canadian cars were rotted out by 1970    



__________________

 
NOS


Poncho Master!

Status: Offline
Posts: 1703
Date:
Permalink  

Impala Sheet metal from Classic Industries with some exceptions are sourced from Dynacorn  who have a Canadian division  Golden Leaf Automotive.  Google it;  all Canadian  prices shipped from Toronto 

How do I know ?  we were a dealer for Golden Leaf for over 25 years

 

Dale @ NOS



__________________
slammedlt1


Member

Status: Offline
Posts: 16
Date:
Permalink  

I cant find the sheet metal for the 67-68 on their site (Golden Leaf) I was speaking about... but it is on the classic industries site.... If I can source it in Canada id buy them tomorrow. Can you get them Dale?

__________________
65wagon


Poncho Master!

Status: Offline
Posts: 2115
Date:
Permalink  

there are some pretty skilled individuals on this site whom could build you what you want, its the time involved



__________________
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.
Canadian Poncho Homepage -> Canadian Poncho -> 65-70 Full Size Body Tech Forum -> Replacement body panels for 67 Parisienne
Tweet this page Post to Digg Post to Del.icio.us
.
Support Canadian Poncho!
Select Amount:
<
.
.
.